Soil Moisture Sensor, Vantage Pro® and Vantage Pro2™
Watermark® soil moisture sensor uses electrical resistance to measure the moisture level of the soil. Does not require periodic maintenance during the growing season. Simply bury at the desired depth, then monitor moisture levels throughout the season. Add up to 4 sensors to a single Leaf & Soil Moisture/Temperature Station. Includes 15′ (4.6M) cable.
Compatible with Vantage Pro and Vantage Pro2. The Soil Moisture Sensor must be connected via a Leaf & Soil Moisture/Temperature Station (#6345).
| Weight | 0.3 g |
|---|---|
| Dimensions | 6 × 4 × 1 cm |
Brand
Davis Instruments
No accessories available for this product.
No videos available for this product.
Related products
Outdoor > Weather Instruments
Wireless Repeater with Solar Power For longer distances or to improve reception in troublesome areas, add one or more Wireless Repeaters. Transmitting and receiving range for each repeater is up to 1000′ (300M) outdoors, line of sight; typical range through walls under most conditions is 200′ to 400′ (60 to 120M). Includes solar panel, regulator [...]
Outdoor > Weather Instruments
UV Sensor Measures the sunburning portion of the UV spectrum. Allows you to display UV index, dose rate, and daily and accumulated dose.Multi-layer filter provides a spectral response that closely matches the Erythema Action Spectrum. Diffuser provides excellent cosine response. Two-piece housing minimizes radiation heating, allows convection cooling of the sensor, and prevents the trapping [...]
Outdoor > Weather Instruments
Wireless Weather Envoy™ Receive data from a wireless Vantage Pro2 integrated sensor suite or wireless Temperature, Temperature/Humidity, or Leaf Wetness & Soil Moisture/Temperature stations, and post it to your computer without a console! When used along with a WeatherLink data logger and software package, Weather Envoy will collect and store data from the outdoor sensors. [...]
Outdoor > Weather Instruments
Rain Collector Heater This product will work with our Vantage Pro and Vantage Pro2 wireless weather stations, however, the heater must be plugged into an electrical outlet. This product cannot be used with our any of our Solar Power Kits or the Vantage Vue station.Use in cold climates to measure freezing rain or the moisture [...]
Outdoor > Weather Instruments
Daytime Fan Aspirated Radiation Shield Kit Product DescriptionAdd the benefits of fan aspiration to your wireless or cabled Vantage Pro2 or Pro2 Plus. Half the cost of our 24-hour fan aspirated radiation shield, but nearly 75% as effective in reducing the effects of daytime radiation. Solar-powered fan runs during the day. Since there is no [...]
Outdoor > Weather Instruments
Omni Antenna for Long-Range Repeater Use with Long-Range Repeater to extend range up to 1,560′ in all directions. Each repeater requires two antennas. You can combine omni and Yagi antennas to collect data from all directions and transmit in a single direction, or vice versa.Includes mounting hardware. NOTE:FCC regulations require that U.S. customers select either [...]
Outdoor > Weather Instruments
Anemometer for Vantage Pro2™ & Vantage Pro® Replacement anemometer with mounting base for wireless and cabled Vantage Pro2 and Vantage Pro weather stations.Rugged components stand up to hurricane-force winds, yet are sensitive to the lightest breeze. Includes both wind speed and wind direction sensors, mounting hardware, and 40′ (12M) cable. SpecificationsWind-tunnel tested to speeds in [...]
Outdoor > Weather Instruments
Davis Stainless Steel Temperature Probe w/2-Wire Termination
Stainless Steel Temperature Probe w/Two-Wire Termination Measure temperature of air, soil, or water with this multi-purpose temperature probe. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect’s internal temperature sensor. Great option for measuring water or soil temperature without [...]