Wireless Long-Range Repeater with Solar Power
For those who wish to send weather data much farther than 1,000′ (300M), the Wireless Long-Range Repeater can extend the range up to two miles (3.2 km).
Please note: Use of this product requires a pair of external antennas, sold separately.The Long-Range Repeater has a transmitting and a receiving cable, each with an end which will connect to an external antenna. Choose either our large omni directional antenna (#7656), range 1,560′ (476 m) in all directions, or our Yagi directional antenna (#7660), range 5,000′ (1.5 km) in one direction. You’ll need two antennas for each Long-Range Repeater.
The charging system is capable of performing continuously even under low light conditions. Includes solar panel, regulator circuit, and rechargeable battery.
Compatible with Vantage Pro2 and Vantage Vue only. Not compatible with original Vantage Pro.
| Weight | 2.4 g |
|---|---|
| Dimensions | 12 × 7 × 3 cm |
Brand
Davis Instruments
No accessories available for this product.
No videos available for this product.
Related products
Outdoor > Weather Instruments
Anemometer for Vantage Pro2™ & Vantage Pro® Replacement anemometer with mounting base for wireless and cabled Vantage Pro2 and Vantage Pro weather stations.Rugged components stand up to hurricane-force winds, yet are sensitive to the lightest breeze. Includes both wind speed and wind direction sensors, mounting hardware, and 40′ (12M) cable. SpecificationsWind-tunnel tested to speeds in [...]
Outdoor > Weather Instruments
WeatherLink for Vantage Pro2™ & Vantage Vue® For the ultimate in weather monitoring, add WeatherLink to your Vantage Pro2™ or Vantage Vue®. The data logger fits neatly into the weather station console or Weather Envoy, storing weather data even when its not connected to your PC. Later, download the data and use the software to [...]
Outdoor > Weather Instruments
Sensor Mounting Shelf For mounting solar radiation sensor and/or UV sensor on Vantage Pro and Vantage Pro2 integrated sensor suite. Rigid shelf with anodized aluminum posts and stainless steel hardware attaches easily next to the rain collector on the outside of the integrated sensor suite.Compatible with both original Vantage Pro and Vantage Pro2.
Outdoor > Weather Instruments
Rain Collector Heater This product will work with our Vantage Pro and Vantage Pro2 wireless weather stations, however, the heater must be plugged into an electrical outlet. This product cannot be used with our any of our Solar Power Kits or the Vantage Vue station.Use in cold climates to measure freezing rain or the moisture [...]
Outdoor > Weather Instruments
Solar Radiation Sensor For use with Vantage Pro and Vantage Pro2. (Already included with Vantage Pro Plus and Vantage Pro2 Plus.)Measures solar radiation and is required (along with an anemometer and a temperature/humidity sensor) if you wish to monitor evapotranspiration.Diffuser element and housing are carefully designed for accurate cosine response. Silicon photo diode provides good [...]
Outdoor > Weather Instruments
Davis 6323 Wireless Integrated Sensor Suite w/24hr Fan Aspirated Radiation Shield
Wireless Vantage Pro2™ ISS with 24-Hr Fan Aspirated Radiation Shield Wireless Integrated Sensor Suite (ISS) for use with Vantage Connect, Vantage Pro2 and Vantage Vue consoles, Weather Envoy and WeatherLink. Our innovative integrated sensor suite combines our rain collector, temperature and humidity sensors, and anemometer into one package – making setup easier than ever and [...]
Outdoor > Weather Instruments
Daytime Fan Aspirated Radiation Shield Kit Product DescriptionAdd the benefits of fan aspiration to your wireless or cabled Vantage Pro2 or Pro2 Plus. Half the cost of our 24-hour fan aspirated radiation shield, but nearly 75% as effective in reducing the effects of daytime radiation. Solar-powered fan runs during the day. Since there is no [...]
Outdoor > Weather Instruments
Davis Stainless Steel Temperature Probe w/2-Wire Termination
Stainless Steel Temperature Probe w/Two-Wire Termination Measure temperature of air, soil, or water with this multi-purpose temperature probe. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect’s internal temperature sensor. Great option for measuring water or soil temperature without [...]