1-1/16″ Wheel Bearing Kit
It may not be an immediate thought, but a trailer’s wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings are designed to automatically maintain the correct internal pressure and not damage the seals. This kit fits a 1-1/16″ diameter.
Features:
- Features a 1-1/16 in. inside diameter
- Automatically maintains the correct internal pressure to avoid seal damage
Includes:
- Two bearing cones, two bearing cups, a grease seal, and a cotter pin
Specifications:
- Finish: Brushed Stainless
- Hub Warehouse: D25
- Warranty: Limited lifetime warranty (one-year finish, one-year parts)
| Weight | 0.6 g |
|---|---|
| Dimensions | 7 × 4 × 2 cm |
Brand
CURT
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Trailering > Bearings/Hubs/Brakes
Hub Kits come complete and ready to install on your axle. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 8,500lb Disc Brake Actuator – Tie Down Engineering Model
8,500lb Disc Brake Actuator – Tie Down Engineering Model The Model 850E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Trailering > Bearings/Hubs/Brakes
Hub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. Spindle: 1-1/16″ Bolt Cir: 5 x 4.5 Cap: 1350 Flange O.D.: 6-1/2″ Max Wheel: 14″ Hub I.D.: 1.98″ WARNING: This [...]
7,500lb Disc Brake Actuator – Tie Down Engineering Model The Model 750E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Trailering > Bearings/Hubs/Brakes
3/4″ Wheel Bearing Kit It may not be an immediate thought, but a trailer’s wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings are designed to automatically maintain the correct internal [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 16,500lb Capacity Disc Brake Actuator w/2-5/16″ Coupler
16,500lb Capacity Disc Brake Actuator with 2-5/16″ Coupler The Model 16.5 works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Trailering > Bearings/Hubs/Brakes
10″ Knott Disc Brake Kit Load Rite’s 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles. Kit Includes: Vented cupped and studded, zinc rotor, and hub assembly Loaded caliper assembly with pads Full inner and outer bearings, races, and corresponding seal Dust cap, [...]
Uncategorized
Load Rite Rotor Complete Kit Vented 9.75″ Integral, No Grease 5 Stud Dacromet Finish Knott
Rotor Complete Kit Vented 9.75" Integral, No Grease 5 Stud Dacromet Finish Knott Complete 9.75″ Disc Brake Rotor Assembly Manufactured by Autoflex Knott. Replacement Disc Brake Rotor Assembly: Fits 5 on 4.5″ Bolt Pattern. Inorganic, Dacromet®, VOC Compliant, Water-Based, Coating Provides “4-Way Corrosion Protection” Against Weathering/Harsh Conditions. Features: Compliant to 1.06″ × 1.38″ Tapered Spindles [...]