Rudder Feedback
Waterproof construction with transducer life rated to over 50 million rudder movements. It is suitable for vessels with rudderstock up to 75 mm (3″) in diameter. It is mounted near the rudder shaft and connected to the tiller arm or quadrant.
| Weight | 3.6 g |
|---|---|
| Dimensions | 12 × 11 × 7 cm |
Brand
ComNav Marine
Accessories
No literature available for this product.
No videos available for this product.
Related products
Marine Navigation & Instruments > Autopilots
Furuno Rudder Reference f/Outboards On Navpilot 500 & 511 Autopilots
The FAPAR4502 is a Rudder Reference Unit for the NavPilot 500/OB and NavPilot 511/OB series autopilot. The FAPAR4502 has an 8″ maximum cylinder stroke. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. [...]
Marine Navigation & Instruments > Autopilots
Type 3 Hydraulic Linear – 12V Type 3 Hydraulic Linear system for mechanically steered vessels up to 77,000lb (35,000kg) displacement. The hydraulic linear drive system is designed for boats with existing mechanical steering systems, not hydraulic steering systems. It provides a totally isolated autopilot steering system consisting of: Features: Hydraulic ram: a self-contained autopilot steering [...]
Marine Navigation & Instruments > Autopilots
TP22 Tillerpilot The TP22 is a reliable and robust autopilot for tiller steered boats up to 34ft in length. Low power draw and precise steering capabilities couple together with minimal noise, allowing you to enjoy some smooth sailing. Features:Easy to usePrecision steeringBattery optimizationSilent sailingWaterproof sealingSimNet compatible Easy To UseA simple selection of controls enable straightforward [...]
Marine Navigation & Instruments > Autopilots
Type 1 Pump 12voltReversing hydraulic pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering rams. The Type 1 hydraulic drive is compatible with both S1/S1G and S2/S2G corepacks. Use the table below to determine the Type 1 hydraulic drive’s capacity when used with each corepack Corepack Used S1 or [...]
Marine Navigation & Instruments > Autopilots
Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume) The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two-piece gear housed in an [...]
Marine Navigation & Instruments > Autopilots
PB909mm Pedestal Bracket
Marine Navigation & Instruments > Autopilots
ST1000 Plus Tiller Pilot ST1000 Plus tiller autopilot for tiller steered sailing vessels up to 6,600 lbs (3,000 kg) *Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement. Includes: Instruction Manual Plus Tiller Pilot 12V Socket Tiller Pin Mounting Socket
Marine Navigation & Instruments > Autopilots
ST2000 Plus Tiller Pilot ST2000 Plus tiller autopilot for tiller steered sailing vessels to 10,000 lbs (4,500 kg) *Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement. Includes:Instruction ManualPlus Tiller Pilot 12V SocketTiller Pin (sold in packages of 5)Mounting Socket (sold in packages [...]