Continuous Duty Solenoid – 12V
Minimizes arcing and contact oxidation, maintains highp erformance. Universal use with part numbers available to handle loads up to 200A.
PVC Coated option available for a more environmentally sealed product. Coated solenoids withstand moisture and dust to IP66.
Mechanical Specifications:
- SPST Normally open contacts
- Plated steel housing. Hexnuts and washers included
- Large (power circuit) battery studs; copper
- 5/16” -24 thread
- Small (control circuit) coil studs; steel 10-32 thread
- Bracket mounting holes 5/16 X 19/32” (7.9 X 15.1mm) on
- 2 13/64” centers (56.0mm)
- Available with PVC coated exterior or Potted Coil interiors
- for harsh environments or vibration resistance
- Caution: Never unscrew the inner hexnuts on the studs
- These keep the stud and inner wiring in place
| Weight | 0.6 g |
|---|---|
| Dimensions | 7 × 4 × 3 cm |
Brand
Cole Hersee
No accessories available for this product.
Literature
Quick Guide: Download PDF
No videos available for this product.
Related products
Electrical > Accessories
1811 Features: Accurate – used with the Vessel Systems Monitor VSM 422 PN 1800-can be precisely calibrated for each tank* Reliable – SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering – Eliminates errors due to liquids sloshing in mobile tanks [...]
Electrical > Accessories
1820 Submersible Temperature Sensor Features: General temperature sensor designed to work for most applications. Easy double-sided tape installation Fully Submersible (IP68) Wires connect in either order Works will all Blue Sea Systems devices that require a temperature sensor WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State [...]
Electrical > Accessories
BF30 30 AMP Female Connector The 30 AMP 125 V connector has been designed to be used with 3-wires (125 V) in a single connector. This retro-fit connector offers superior performance and ease of use. The SmartPlug connector is designed to use your current cordset. You simply cut off the cord plug on your RV/Boat [...]
Electrical > Accessories
Weathercap The SmartPlug Weatherproof Cover protects SmartPlug boatside shore power connectors from moisture when not in use. Comes with a lanyard for tethering the Weatherproof Cover to a cordset. Features Weatherproof seal – Seals against multi-fin gasket in connector face Ease of Use – Locks into the face of a SmartPlug Connector Easy to Store – Included lanyard [...]
Electrical > Accessories
This convenient adapter allows quick thru-hull connections to an AC extension cord – with no cutting or splicing required – using the male AC plug from any of our chargers. The watertight cover and gasket prevent corrosion on the AC plug when it isn’t in use. WARNING: This product can expose you to chemicals including [...]
Electrical > Accessories
This convenient adapter allows quick thru-hull connections to an AC extension cord – with no cutting or splicing required – using the male AC plug from any of our chargers. The watertight cover and gasket prevent corrosion on the AC plug when it isn’t in use. WARNING: This product can expose you to chemicals including [...]
Electrical > Accessories
BF50 50 AMP Female Connector The 50 AMP 125V/250 V connector has been designed to be used with 3-wires (125 V) or 4-wires (250 V) in a single connector. This retro-fit connector offers superior performance and ease of use. The SmartPlug connector is designed to use your current cordset. You simply cut off the cord [...]
Electrical > Accessories
Replacement Lithium Battery for Pathfinder 3 SART Features: User-replaceable Non-Hazmat Specifically for Pathfinder 3 SART WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original [...]