Pontoon Post Guide-On
Loading your pontoon boat onto your trailer is much easier with post guide-ons. These guide-ons mount on top of rear cross member and fit in between the pontoons to center your boat on the trailer. Steel arms are made of 1-1/2″ galvanized tubing and extend fully into sturdy 2″ PVC tubes. Fit up to 3″ x 4-1/4″ frames. 22″ high. Sold in pairs.
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 14.2 g |
|---|---|
| Dimensions | 21 × 18 × 4 cm |
Brand
C.E. Smith
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Trailering > Guide-Ons
40″ Post Guide-On With Unlighted Posts These Post Guide-Ons allow you to see the location of your trailer when it’s under water. The 2″ PVC tubes make it easy to see your trailer’s position when backing down the ramp. Features: Mounting hardware included Adjusts out to 13″ each Side Fits Frames up to 3″ W [...]
Trailering > Guide-Ons
Boat Roller Guide Kit – Pair Features: Boat guides help you visually guide your boat onto your trailer High-strength super gripper mounting brackets attach firmly above and below the trailer frame Easy bolt-on mounting fits trailer frames up to 3″ x 5″ high Adjustable to provide optimum fit to any hull design WARNING: This product [...]
Trailering > Guide-Ons
C.E. Smith 75″ Post Guide-On w/Unlighted Posts f/U-Bolt Mounting
75″ Post Guide-On w/Unlighted Posts f/U-Bolt Mounting Product DescriptionThese Post Guide-Ons allow you to see the location of your trailer when it’s under water. The 2″ PVC tubes make it easy to see your trailer’s position when backing down the ramp. Features:Mounting hardware included Sold in pairsAdjusts out to 19″ each sideFits frames up to [...]
Trailering > Guide-Ons
LED Post Guide Light Kit These tough, long lasting, waterproof and shockproof LED post guide lamps make it easy to see your trailer’s position when backing down the ramp and dramatically increase your trailer’s visibility over the road at night. One piece lamps fit easily on top of your existing 2″ PVC post guide-ons. Amber [...]
Trailering > Guide-Ons
60″ Post Guide-On With L.E.D. Posts These Post Guide-Ons allow you to see the location of your trailer when it’s under water. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer’s position when backing down the ramp and dramatically increase [...]
Trailering > Guide-Ons
5′ Bunk Board Guide-On Product DescriptionCarpeted bunkboards provide proper center loading even in wind or side current conditions. 1-1/2″ square pre-galvanized uprights, angled out at 75°2″ x 4″ x 60″ boards tilt to hug the hull and are covered with high grade marine carpetBoards are untreated Southern yellow pine Height of 21″ with adjustment out [...]
Trailering > Guide-Ons
Post Guide-On 65″ – Aluminum These post-guide-ons utilize uprights that mount directly to your I-Beam trailer frame using stainless steel u-bolts, nuts, and washers for a fit that will work on virtually any size I-Beam frame. The metal uprights can be adjusted up to 19” out from each side of the trailer frame. Recommended for [...]
Trailering > Guide-Ons
60″ Black PVC Post Guide-On C.E. Smith® Trailer Post Guide-Ons give a clear visual marker to know you’re backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for [...]