60″ Post Guide-On With L.E.D. Posts
These Post Guide-Ons allow you to see the location of your trailer when it’s under water. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer’s position when backing down the ramp and dramatically increase your trailer’s visibility over the road at night. Amber light faces front, red faces rear.
Features:
- Mounting hardware and wiring included
- Adjusts Out to 19″ each Side
- Fits Frames up to 3″W x 4-1/4″H
- 1-1/2″ square, 16 gauge pre-galvanized steel uprights that are 39″ high
- 2-3/8″ diameter white PVC posts
- Stands 60″ above the trailer frame
- Made in the USA
- Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized
- The galvanized coating is very thin (0.45 oz. on each side)
*Sold in pairs
| Weight | 24.2 g |
|---|---|
| Dimensions | 49 × 25 × 3 cm |
Brand
C.E. Smith
No accessories available for this product.
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Trailering > Guide-Ons
60″ Post Guide-On With I-Beam Mounting Kit Product Description These Post Guide-Ons allow you to see the location of your trailer when it’s under water. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam. Brackets will fit onto any height and [...]
Trailering > Guide-Ons
Trailer LED Guide Light Kit Attwood’s LED Trailer Guide Lights provide excellent visibility while backing up and maneuvering your trailer. Guides allow for easy identification of trailer angle and assist when backing at boat ramps and tight areas. The LED lights provide bright indicators in low light conditions. The mounting bracket resists corrosion in the [...]
Trailering > Guide-Ons
Post Guide-On 65″ – Aluminum These post-guide-ons utilize uprights that mount directly to your I-Beam trailer frame using stainless steel u-bolts, nuts, and washers for a fit that will work on virtually any size I-Beam frame. The metal uprights can be adjusted up to 19” out from each side of the trailer frame. Recommended for [...]
Trailering > Guide-Ons
Black 40″ Post Guide-On C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you’re backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion [...]
Trailering > Guide-Ons
Boat Guide On Kit – 50″ – Pair Boat guides help you visually guide your boat onto your trailer. High – strength super gripper mounting brackets attach firmly above and below the trailer frame. Easy bolt-on mounting fits trailer frames up to 3″ x 5″ high. Adjustable to provide optimum fit to any hull design. [...]
Trailering > Guide-Ons
PVC Replacement Cap – Pair PVC Replacement Cap for 2″ Trailer Boat Post Guide.
Trailering > Guide-Ons
Boat Guide On Kit – 44″ – Pair Features: Boat guides help you visually guide your boat on your trailer High-strength super gripper mounting brackets attach firmly above and below the trailer frame Easy bolt-on mounting fits trailer frames up to 3″ x 5″ high Adjustable to provide optimum fit to any hull design Upright [...]
Trailering > Guide-Ons
Carpeted bunkboards provide proper center loading even in wind or side current conditions. 2” x 4” X 24″ boards tilt to hug the hull and are covered with high grade marine carpet. Height of 21” with adjustment out to 13″ from frame on each side. Can be mounted on top of frame for extra height. [...]