Carpeted bunkboards provide proper center loading even in wind or side current conditions. 2” x 4” X 24″ boards tilt to hug the hull and are covered with high grade marine carpet. Height of 21” with adjustment out to 13″ from frame on each side. Can be mounted on top of frame for extra height. Complete with mounting hardware to fit frames up to 3” wide x 4-1/4” high.
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 20.1 g |
|---|---|
| Dimensions | 29 × 12 × 6 cm |
Brand
C.E. Smith
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Trailering > Guide-Ons
60″ Post Guide-On With L.E.D. Posts These Post Guide-Ons allow you to see the location of your trailer when it’s under water. Equipped with long lasting, waterproof and shockproof, one piece red and amber LED lamps. The LED lamps make it easy to see your trailer’s position when backing down the ramp and dramatically increase [...]
Trailering > Guide-Ons
60″ Post Guide-On With Unlighted Posts These Post Guide-Ons allow you to see the location of your trailer when it’s under water. The 2″ PVC tubes make it easy to see your trailer’s position when backing down the ramp. Features: Mounting hardware included Sold in pairs Adjusts out to 19″ each side Fits frames up [...]
Trailering > Guide-Ons
5′ Bunk Board Guide-On Product DescriptionCarpeted bunkboards provide proper center loading even in wind or side current conditions. 1-1/2″ square pre-galvanized uprights, angled out at 75°2″ x 4″ x 60″ boards tilt to hug the hull and are covered with high grade marine carpetBoards are untreated Southern yellow pine Height of 21″ with adjustment out [...]
Trailering > Guide-Ons
Trailer LED Guide Light Kit Attwood’s LED Trailer Guide Lights provide excellent visibility while backing up and maneuvering your trailer. Guides allow for easy identification of trailer angle and assist when backing at boat ramps and tight areas. The LED lights provide bright indicators in low light conditions. The mounting bracket resists corrosion in the [...]
Trailering > Guide-Ons
60″ Post Guide-On With I-Beam Mounting Kit Product Description These Post Guide-Ons allow you to see the location of your trailer when it’s under water. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam. Brackets will fit onto any height and [...]
Trailering > Guide-Ons
Post Guide-On 65″ – Aluminum These post-guide-ons utilize uprights that mount directly to your I-Beam trailer frame using stainless steel u-bolts, nuts, and washers for a fit that will work on virtually any size I-Beam frame. The metal uprights can be adjusted up to 19” out from each side of the trailer frame. Recommended for [...]
Trailering > Guide-Ons
60″ Black PVC Post Guide-On C.E. Smith® Trailer Post Guide-Ons give a clear visual marker to know you’re backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for [...]
Trailering > Guide-Ons
Black 40″ Post Guide-On C.E. Smith Trailer Post Guide-Ons give a clear visual marker to know you’re backing, loading, or unloading your boat trailer evenly and properly to avoid costly damage. Unlike plastic guide-ons that fall apart or break with minimal impact, C.E. Smith Post Guide-Ons boats square 16 gauge steel uprights, pre-galvanized for corrosion [...]