L Solenoid Switch – 12-24VDC – 250A
Features:
- Hermetically sealed contacts / vaporproof
- Ignition protected – safe for installation aboard gasoline powered boats
- Activated by an ON-OFF switch mounted anywhere
- Integrated coil control minimizes heating and amperage draw
- 450 Amp Class
- Designed for 12 or 24 Volt systems
- Ignition protected — safe for installation aboard gasoline-powered boats
- Activated by a low amperage ON-OFF switch mounted anywhere
Specifications:
- Control Circuit Connection: 20 AWG Tinned Wire
- Nominal Voltage: 12V DC / 24V DC
- Coil Function: Normally Open
- Mounting: #10
- Operating Amperage Current: 3.6A when changing state
- Amperage Operating Current: 0.13A @ 12 V / 0.07A @ 24 V
- Terminal Stud Torque: 90 in-lb (10.17 Nm)
- Continuous Rating: 250A Using 1/0 Wire Size / 300A Using 2/0 Wire Size / 400A Using 4/0 Wire Size / 450A Using 2 x (2/0) Wire Size
- Intermittent Rating: 275A (5 min) Using 1/0 Wire Size / 400A (5 min) Using 2/0 Wire Size / 500A (5 min) Using 4/0 Wire Size / 600A (5 min) Using 2 x (2/0) Wire Size
- Cranking Rating 30 sec: 1,000A / 1000A DC
- Contact Form: SPST-NO
- Input Voltage: 9-36V DC
- Inrush Rating: 0.25 sec (10 repeats): 2000A
- Switching Cycles: 1,000,000
- Terminal Stud: Serrated Flange Nut
- Terminal Stud Length: 0.66" (16.76mm)
- Terminal Stud Size: 5/16" (M8)
- Weight: 1.00lb (0.45 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 1 g |
|---|---|
| Dimensions | 7 × 4 × 3 cm |
Brand
Blue Sea Systems
Accessories
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Electrical > Battery Management
9001e e-Series Battery Switch Selector Features: Make-before-break contact design allows switching between battery banks without power interruption CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8″-16 tin-plated copper studs for maximum conductivity [...]
Electrical > Battery Management
Battery Selector Switch with AFD Part No. 2110A Description Continuous Amps: 230Momentary Amps: 345Dimensions: 5″D x 2-3/4″H Product FeaturesAlternator field disconnect (AFD) allows selection of any positions, including “off” without damage to alternator or electrical system. AFD is required on some electrical systems. Heavy duty copper sweep contacts “Make before break” contacts allow selection of [...]
Electrical > Battery Management
Diesel Power Battery Heavy-Duty Switch Features: For 6, 12, 24 or 36 Volt systems Polycarbonate case One year warranty Specifications: Continuous Amps: 450 Momentary Amps: 800 Cable Lug Size: 1/2″ Color: Gray Dimensions: 5-1/2″ sq x 3-1/2″H WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of [...]
Electrical > Battery Management
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect
3003 HD-Series Battery Switch Selector with Alternator Field Disconnect Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept 4 or more cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht [...]
Electrical > Battery Management
m-Series Dual Circuit Plus PN 6011 (1) 100A C-Series Flat Rocker Circuit Breaker(2) 15A Push Button Thermal Circuit Breakers Designed for twin engine configurations Provides 24 hour circuit protection Provides main DC circuit protection in addition to high ampere load protection Protects electronics from sags and spikes caused by engine cranking Allows emergency cross connect [...]
Electrical > Battery Management
Cruiser Series Battery Selector Switch with AFD Part No. 2100 Description Continuous Amps: 230Momentary Amps: 345Cable Lug Size: 3/8″Color: OrangeDimensions: 5-1/2″W x 2-5/8″ Product FeaturesAlternator field disconnect (AFD) allows selection of any position, including “off” without damage to alternator or electrical system Polycarbonate case For 6, 12, 24 or 36 volt systems One year Warranty [...]
Electrical > Battery Management
8080 Single Circuit ON/OFF – Plus Main Installed Components: 2 6006 m-Series Switches 1 100A c-Series Flat Rocker Circuit Breaker Features: Isolates batteries and provides DC main circuit protection Ignition protected – Safe for installation aboard gasoline powered boats Isolates the Engine circuit from the House circuit Simplifies battery switch operation Protects electronics from sags [...]
Electrical > Battery Management
Blue Sea 9003e e-Series Battery Switch Single Circuit ON/OFF
9003e e-Series Battery Switch Single Circuit ON/OFF Features: CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8″-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8″ and M10 ring terminals [...]