m-Series Mini On-Off Battery Switch with Key – Black
Switches a single battery to a single load group Ignition protected-safe for installation aboard gasoline powered boats.
Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts.
Switch Type: Single Circuit ON-OFF
Color: Black
Switch Positions: 2
Battery Combine: No
Alternator Field Disconnect: No
Maximum Voltage: 48V DC
Continuous Rating : 300A
Intermittent Rating : 500A (5 min)
Cranking Rating 10 sec: 1500A
Cranking Rating 1 min: 775A
Battery Inputs: 1
Cable Clearance For 4/0 AWG Cables: 1.12in (28.45 mm)
Cable Size to Meet Ratings: 4/0 AWG (120mm²)
Mounting Holes: Accept #10 Screw
Terminal Stud Size: 3/8″-16 (M10)
Terminal Stud Torque: 120 in-lb (13.56 Nm)
Weight: 0.62lb (0.28/ kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 0.6 g |
|---|---|
| Dimensions | 7 × 4 × 3 cm |
Brand
Blue Sea Systems
Accessories
- Blue Sea 7902 Icon Circuit Identification Label Kit for Battery Switches
- Ancor Red 4 AWG Battery Cable - Sold By The Foot
- Ancor Red 2 AWG Battery Cable - Sold By The Foot
- Ancor Red 1 AWG Battery Cable - Sold By The Foot
- Ancor Red 1/0 AWG Battery Cable - Sold By The Foot
- Ancor Red 2/0 AWG Battery Cable - Sold By The Foot
- Ancor Heavy Duty Lugs - 4 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Red 3/0 AWG Battery Cable - Sold By The Foot
- Ancor Red 4/0 AWG Battery Cable - Sold By The Foot
- Ancor Heavy Duty Lugs - 3/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 2-Pack
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Electrical > Battery Management
Battery Selector Switch Part No. 2111A Features New ergonomically styled turn knob provides easy On/Off switching Updated color scheme and graphics make it easier to determine switch status Longer stud lengths for improved assembly and easier cable routing Built with heavy-duty copper sweep contacts to ensure positive circuit control Rugged internal components protected by a [...]
Electrical > Battery Management
3002 HD-Series Battery Switch Selector Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept 4 or more cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht Council (ABYC) requirements for [...]
Electrical > Battery Management
Blue Sea 6007 m-Series (Mini) Battery Switch Selector Four Position Red
6007m-Series (Mini) Battery Switch Selector Make before break contact design allows switching between battery banks without power interruption Selector Switches battery bank 1 or battery bank 2 or both to a single load using one switch Features: Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear [...]
Electrical > Battery Management
Spare key for m-series (mini) Switch (6005) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Electrical > Battery Management
Single Circuit On/Off CE Marked Enables a failed House or Start battery bank to be isolated from the electrical system and both House and Start loads to be operated from the remaining battery bank Simplifies battery switch operation Isolates Start circuit from House circuit Protects electronics from sags and spikes caused by engine cranking Ignition [...]
Electrical > Battery Management
Blue Sea 9002e e-Series Battery Switch Selector w/Alternator Field Disconnect
9002e e-Series Battery Switch Selector with Alternator Field Disconnect Features: Switches isolated battery banks to all loads or combines battery banks to all loads Includes AFD (Alternator Field Disconnect) Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel [...]
Electrical > Battery Management
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect
3003 HD-Series Battery Switch Selector with Alternator Field Disconnect Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept 4 or more cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht [...]
Electrical > Battery Management
Cruiser Series Battery Selector Switch with AFD Part No. 2100 Description Continuous Amps: 230Momentary Amps: 345Cable Lug Size: 3/8″Color: OrangeDimensions: 5-1/2″W x 2-5/8″ Product FeaturesAlternator field disconnect (AFD) allows selection of any position, including “off” without damage to alternator or electrical system Polycarbonate case For 6, 12, 24 or 36 volt systems One year Warranty [...]