Hydraulic Ram Type 1 – 12V
High power, efficient drive units for maximum power with minimum consumption Ram allows the Power Steer Mode on the Pilot to be used in case of manual steering failure Integrated hydraulic system: no external hoses, reservoirs, etc…
| Weight | 22.25 g |
|---|---|
| Dimensions | 32 × 11 × 7 cm |
Brand
B&G
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Navigation & Instruments > Autopilots
SP-80Fixed-Mount Autopilot SystemCruise Control at Sea. The SP-80 takes the helm and sets you free. For boaters who know where they’re going. SP-80 takes you where you want to be–effortlessly. It’s smart, precise piloting gives you the extra hand on deck you’ve always needed. And the operation is a snap: Simply set the course and [...]
Marine Navigation & Instruments > Autopilots
TP10 Tillerpilot The TP10 delivers reliable auto steering for boats with tillers up to 32ft in length. Simple, straightforward controls and a precise steering system – normally only found on higher-end models – combines in a quiet package with extremely low power draw to allow sailors a safe passage in coastal waters. Features:Easy to usePrecision [...]
Marine Navigation & Instruments > Autopilots
Type 3 Hydraulic Linear – 12V Type 3 Hydraulic Linear system for mechanically steered vessels up to 77,000lb (35,000kg) displacement. The hydraulic linear drive system is designed for boats with existing mechanical steering systems, not hydraulic steering systems. It provides a totally isolated autopilot steering system consisting of: Features: Hydraulic ram: a self-contained autopilot steering [...]
Marine Navigation & Instruments > Autopilots
ST1000 Plus Tiller Pilot ST1000 Plus tiller autopilot for tiller steered sailing vessels up to 6,600 lbs (3,000 kg) *Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement. Includes: Instruction Manual Plus Tiller Pilot 12V Socket Tiller Pin Mounting Socket
Marine Navigation & Instruments > Autopilots
Tiller Bracket The 120MM(4.72″) Tiller Bracket is designed for use with Simrad autopilot computer systems.
Marine Navigation & Instruments > Autopilots
5M Extension Cable Garmin 5M (16.40 ft) extension cable for your GHP™ 10 is the perfect accessory for mounting the CCU further than 3M (9.84 ft) from the ECU. Compatible Devices:GHP™ 10 Marine Autopilot System WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth [...]
Marine Navigation & Instruments > Autopilots
Type 1 Pump 12voltReversing hydraulic pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering rams. The Type 1 hydraulic drive is compatible with both S1/S1G and S2/S2G corepacks. Use the table below to determine the Type 1 hydraulic drive’s capacity when used with each corepack Corepack Used S1 or [...]
Marine Navigation & Instruments > Autopilots
Furuno Rudder Reference f/Outboards On Navpilot 500 & 511 Autopilots
The FAPAR4502 is a Rudder Reference Unit for the NavPilot 500/OB and NavPilot 511/OB series autopilot. The FAPAR4502 has an 8″ maximum cylinder stroke. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. [...]