Pro Installer 400A EZ-Mount Double Pole Battery Switch – MC10
An addition to our multi award winning Pro Installer EZ Mount range, this battery switch provides Double Pole On/Off functionality so that both positive and negative battery terminals can be isolated. Most commonly used on metal hulled craft, full isolation ensures there is no risk of stray currents that may cause galvanic corrosion, and also guarantees optimum safety during servicing or mishap, for example with mining equipment. As easy as 1, 2, 3, these revolutionary battery switches allow you to wire from the front for the easiest surface mounting. With their shared interconnection height, EZ-Mount battery switches “cluster” directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze.
Features:
- Tested to UL1107 ignition protection, CE
- Tinned copper 10 mm (3/8 in) studs
- Stainless steel washers and nuts
- Fiber reinforced plastics
- 400A Continuous / 600A 5 minutes Intermittent / 1500A 10 seconds Cranking
- (cable size to achieve ratings 120mm}, 4/0, smaller cable size will reduce
- the Amp rating)
- Waterproof to IP67
- Same interconnection height as Pro Installer
- Removable knob allows isolation during servicing
- 3 removable side plates for protection
- Industry standard 3.85 x 3.85 inch footprint
- Surface mount only
- Each Pro Installer battery switch is fully tested for pressure sealing,
- Rotation force and electrically load tested
Specifications
Mounting: Surface Only
Voltage: 48v DC (for 12-48v systems)
Rating: 400 Cont / 600 Inter / 1500 Crank
Dims: 3.85″ x 3.85″ x 3.62″
Operation: On/Off
Stud: 4x 10 mm (3.8″)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 1.2 g |
|---|---|
| Dimensions | 8 × 7 × 4 cm |
Brand
BEP Marine
Accessories
- Ancor Black 2 AWG Battery Cable - 25'
- Ancor Red 2 AWG Battery Cable - 25'
- Ancor Black 2/0 AWG Battery Cable - 100'
- Ancor Red 2/0 AWG Battery Cable - 100'
- Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Red 4/0 AWG Battery Cable - 50'
- Ancor Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 10-Pack
- Ancor Black 4/0 AWG Battery Cable - 25'
- Ancor Black 4/0 AWG Tinned Copper Battery Cable - 50'
- Ancor Black 1 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 1 AWG Tinned Copper Battery Cable - 25'
- Ancor Black 1/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 1/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Black 2/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 2/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 4/0 AWG Battery Cable - 25'
No videos available for this product.
Related products
Electrical > Battery Management
6010m-Series (Mini) Battery Switch Dual Circuit™ Switches both positive and negative lines simultaneously with one simple ON/OFF switch meeting European and metal boat requirements for a double pole switch Switches circuits of different voltages, such as 12 volt and 24 volt, simultaneously with one simple ON/OFF switch Features: Ignition protected – Safe for installation aboard [...]
Electrical > Battery Management
Blue Sea 9003e e-Series Battery Switch Single Circuit ON/OFF
9003e e-Series Battery Switch Single Circuit ON/OFF Features: CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8″-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8″ and M10 ring terminals [...]
Electrical > Battery Management
Blue Sea 6007 m-Series (Mini) Battery Switch Selector Four Position Red
6007m-Series (Mini) Battery Switch Selector Make before break contact design allows switching between battery banks without power interruption Selector Switches battery bank 1 or battery bank 2 or both to a single load using one switch Features: Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear [...]
Electrical > Battery Management
m-Series Dual Circuit Plus 2 of PN 6011 (1) 100A C-Series Flat Rocker Circuit Breaker(3) 15A Push Button Thermal Circuit Breakers Designed for twin engine configurations Provides 24 hour circuit protection Provides main DC circuit protection in addition to high ampere load protection Protects electronics from sags and spikes caused by engine cranking Allows emergency [...]
Electrical > Battery Management
5510EDual Circuit Battery Switch CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8" – 16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals 7/8" stud [...]
Electrical > Battery Management
L Solenoid Switch – 12-24VDC – 250A Features: Hermetically sealed contacts / vaporproof Ignition protected – safe for installation aboard gasoline powered boats Activated by an ON-OFF switch mounted anywhere Integrated coil control minimizes heating and amperage draw 450 Amp Class Designed for 12 or 24 Volt systems Ignition protected — safe for installation aboard [...]
Electrical > Battery Management
Diesel Power Battery Heavy-Duty Switch Features: For 6, 12, 24 or 36 Volt systems Polycarbonate case One year warranty Specifications: Continuous Amps: 450 Momentary Amps: 800 Cable Lug Size: 1/2″ Color: Gray Dimensions: 5-1/2″ sq x 3-1/2″H WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of [...]
Electrical > Battery Management
Blue Sea 9004e e-Series Battery Switch Single Circuit ON/OFF w/Alternator Field Disconnect
9004e e-Series Battery Switch Single Circuit ON/OFF with Alternator Field Disconnect Features: CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8″-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8″ [...]