BEP Horizontal Battery Distribution Cluster f/Single Engine w/Two Battery Banks
$286.08
3 in stock
Horizontal Battery Distribution Cluster f/Single Engine w/Two Battery Banks
The 716-H-140A-DVSR is an ideal replacement for a battery selector switch. Just remove the selector switch and connect the existing wires to a 716 cluster, no extra wires are required for a fully automatic battery management system. To be used in a single outboard dual battery bank system or in a single alternator inboard engine dual battery bank system.
- No more flat start batteries
- Electronics protection from harmful engine start spikes
- The 716 cluster is for use on charging systems up to 150A
- The 716 cluster replaces battery isolator systems
- Two battery banks
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 2.15 g |
|---|---|
| Dimensions | 14 × 4 × 2 cm |
Brand
BEP Marine
Accessories
- Ancor Black 2 AWG Battery Cable - 25'
- Ancor Red 2 AWG Battery Cable - 25'
- Ancor Black 2/0 AWG Battery Cable - 100'
- Ancor Red 2/0 AWG Battery Cable - 100'
- Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Red 4/0 AWG Battery Cable - 50'
- Ancor Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 10-Pack
- Ancor Black 4/0 AWG Battery Cable - 25'
- Ancor Black 4/0 AWG Tinned Copper Battery Cable - 50'
- Ancor Black 1 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 1 AWG Tinned Copper Battery Cable - 25'
- Ancor Black 1/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 1/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Black 2/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 2/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 4/0 AWG Battery Cable - 25'
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Electrical > Battery Management
Battery Selector Switch with AFD Part No. 2110A Description Continuous Amps: 230Momentary Amps: 345Dimensions: 5″D x 2-3/4″H Product FeaturesAlternator field disconnect (AFD) allows selection of any positions, including “off” without damage to alternator or electrical system. AFD is required on some electrical systems. Heavy duty copper sweep contacts “Make before break” contacts allow selection of [...]
Electrical > Battery Management
m-Series Dual Circuit Plus PN 6011 (1) 100A C-Series Flat Rocker Circuit Breaker(2) 15A Push Button Thermal Circuit Breakers Designed for twin engine configurations Provides 24 hour circuit protection Provides main DC circuit protection in addition to high ampere load protection Protects electronics from sags and spikes caused by engine cranking Allows emergency cross connect [...]
Electrical > Battery Management
L Solenoid Switch – 12-24VDC – 250A Features: Hermetically sealed contacts / vaporproof Ignition protected – safe for installation aboard gasoline powered boats Activated by an ON-OFF switch mounted anywhere Integrated coil control minimizes heating and amperage draw 450 Amp Class Designed for 12 or 24 Volt systems Ignition protected — safe for installation aboard [...]
Electrical > Battery Management
Cruiser Series Battery Selector Switch with AFD Part No. 2100 Description Continuous Amps: 230Momentary Amps: 345Cable Lug Size: 3/8″Color: OrangeDimensions: 5-1/2″W x 2-5/8″ Product FeaturesAlternator field disconnect (AFD) allows selection of any position, including “off” without damage to alternator or electrical system Polycarbonate case For 6, 12, 24 or 36 volt systems One year Warranty [...]
Electrical > Battery Management
Diesel Power Battery Heavy-Duty Switch Features: For 6, 12, 24 or 36 Volt systems Polycarbonate case One year warranty Specifications: Continuous Amps: 450 Momentary Amps: 800 Cable Lug Size: 1/2″ Color: Gray Dimensions: 5-1/2″ sq x 3-1/2″H WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of [...]
Electrical > Battery Management
Single Circuit On/Off CE Marked Enables a failed House or Start battery bank to be isolated from the electrical system and both House and Start loads to be operated from the remaining battery bank Simplifies battery switch operation Isolates Start circuit from House circuit Protects electronics from sags and spikes caused by engine cranking Ignition [...]
Electrical > Battery Management
e-Series Dual Circuit Plus PN 5511e (1) 100A C-Series Flat Rocker Circuit Breaker(2) 15A Push Button Thermal Circuit Breakers Designed for twin engine configurations Provides 24 hour circuit protection Provides main DC circuit protection in addition to high ampere load protection Protects electronics from sags and spikes caused by engine cranking Allows emergency cross connect [...]
Electrical > Battery Management
Battery Selector Switch Part No. 2111A Features New ergonomically styled turn knob provides easy On/Off switching Updated color scheme and graphics make it easier to determine switch status Longer stud lengths for improved assembly and easier cable routing Built with heavy-duty copper sweep contacts to ensure positive circuit control Rugged internal components protected by a [...]