Blue Sea 3000 HD-Series Battery Switch Single Circuit ON/OFF 
BEP Battery Distribution Cluster f/Twin Outboard Engines w/Three Battery Banks
$496.84
2 in stock
Battery Distribution Cluster f/Twin Outboard Engine w/Three Battery Banks
The 717-140A-DVSR is designed for twin engine installations. It allows the port engine to charge both the port start battery and the house battery when the port VSR is engaged. It also allows the starboard engine to charge both the starboard start battery and the house battery when the starboard VSR is engaged. This gives you a combined charge from two engines into the house battery until the voltage regulators on both engines control the charge. It also allows you to charge the house battery if steaming on one engine.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 3.1 g |
|---|---|
| Dimensions | 10 × 6 × 3 cm |
Brand
BEP Marine
Accessories
- Ancor Black 2 AWG Battery Cable - 25'
- Ancor Red 2 AWG Battery Cable - 25'
- Ancor Black 2/0 AWG Battery Cable - 100'
- Ancor Red 2/0 AWG Battery Cable - 100'
- Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Red 4/0 AWG Battery Cable - 50'
- Ancor Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 10-Pack
- Ancor Black 4/0 AWG Battery Cable - 25'
- Ancor Black 4/0 AWG Tinned Copper Battery Cable - 50'
- Ancor Black 1 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 1 AWG Tinned Copper Battery Cable - 25'
- Ancor Black 1/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 1/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Black 2/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 2/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 4/0 AWG Battery Cable - 25'
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Electrical > Battery Management
3002 HD-Series Battery Switch Selector Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept 4 or more cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht Council (ABYC) requirements for [...]
Electrical > Battery Management
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect
3003 HD-Series Battery Switch Selector with Alternator Field Disconnect Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept 4 or more cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht [...]
Electrical > Battery Management
Blue Sea 6011 m-Series (Mini) Battery Switch Dual Circuit Plus
6011m-Series (Mini) Battery Switch Dual Circuit Plus™ Switches two battery banks simultaneously with one simple ON/OFF switch while maintaining battery bank isolation, minimizing the risk of a dead Start battery The "Combine Batteries" function offers the ability to combine the two battery banks in the event of a low Start battery Features: Ignition protected – [...]
Electrical > Battery Management
9001e e-Series Battery Switch Selector Features: Make-before-break contact design allows switching between battery banks without power interruption CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8″-16 tin-plated copper studs for maximum conductivity [...]
Electrical > Battery Management
5510EDual Circuit Battery Switch CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8" – 16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals 7/8" stud [...]
Electrical > Battery Management
Blue Sea 7902 Icon Circuit Identification Label Kit for Battery Switches
7902Icon Circuit Identification Label Kit for Battery Switches 18 icon labels for battery switches, use to identify circuits Examples: Battery, Bow Thruster, Chassis Engine, House WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more [...]
Electrical > Battery Management
Spare knob for m-series (mini) switch (6006) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Electrical > Battery Management
L Solenoid Switch – 12-24VDC – 250A Features: Hermetically sealed contacts / vaporproof Ignition protected – safe for installation aboard gasoline powered boats Activated by an ON-OFF switch mounted anywhere Integrated coil control minimizes heating and amperage draw 450 Amp Class Designed for 12 or 24 Volt systems Ignition protected — safe for installation aboard [...]