BEP Battery Distribution Cluster f/Single Engine w/Two Battery Banks w/Motorized VSR
$350.11
Out of stock
Single Engine w/Two Battery Banks w/Motorized VSR
The 80-716-0017-00 is an ideal replacement for a battery selector switch. Simply remove the selector switch and connect the existing wires to a 716 cluster. On this model, the VSR and emergency parallel switch are combined into one voltage-sensitive switch that can be remote operated. The 716 cluster is for use on charging systems up to 150A. To be used in single outboard systems with a dual battery bank or single alternator inboard engines with a dual battery bank. The 716 cluster replaces battery isolator systems.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 1.9 g |
|---|---|
| Dimensions | 9 × 6 × 5 cm |
Brand
BEP Marine
Accessories
- Ancor Black 2 AWG Battery Cable - 25'
- Ancor Red 2 AWG Battery Cable - 25'
- Ancor Black 2/0 AWG Battery Cable - 100'
- Ancor Red 2/0 AWG Battery Cable - 100'
- Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 25-Pack
- Ancor Red 4/0 AWG Battery Cable - 50'
- Ancor Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 2-Pack
- Ancor Heavy Duty Lugs - 4/0 Gauge Wire - 3/8" Post - 10-Pack
- Ancor Black 4/0 AWG Battery Cable - 25'
- Ancor Black 4/0 AWG Tinned Copper Battery Cable - 50'
- Ancor Black 1 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 1 AWG Tinned Copper Battery Cable - 25'
- Ancor Black 1/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 1/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Black 2/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 2/0 AWG Tinned Copper Battery Cable - 25'
- Ancor Red 4/0 AWG Battery Cable - 25'
Literature
Installation Guide: Download PDF
No videos available for this product.
Related products
Electrical > Battery Management
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect
3003 HD-Series Battery Switch Selector with Alternator Field Disconnect Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept 4 or more cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht [...]
Electrical > Battery Management
Battery Selector Switch with AFD Part No. 2110A Description Continuous Amps: 230Momentary Amps: 345Dimensions: 5″D x 2-3/4″H Product FeaturesAlternator field disconnect (AFD) allows selection of any positions, including “off” without damage to alternator or electrical system. AFD is required on some electrical systems. Heavy duty copper sweep contacts “Make before break” contacts allow selection of [...]
Electrical > Battery Management
Spare key for m-series (mini) Switch (6005) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Electrical > Battery Management
3002 HD-Series Battery Switch Selector Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept 4 or more cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht Council (ABYC) requirements for [...]
Electrical > Battery Management
Cruiser Series Battery Selector Switch without AFD This battery switch can be used on 6, 12, 24 or 36V systems. Features: Polycarbonate case Surface mount Cable Lug Size: 3/8″ Dimensions: 5.50″ x 2.63″ WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, [...]
Electrical > Battery Management
6010m-Series (Mini) Battery Switch Dual Circuit™ Switches both positive and negative lines simultaneously with one simple ON/OFF switch meeting European and metal boat requirements for a double pole switch Switches circuits of different voltages, such as 12 volt and 24 volt, simultaneously with one simple ON/OFF switch Features: Ignition protected – Safe for installation aboard [...]
Electrical > Battery Management
Blue Sea 6007 m-Series (Mini) Battery Switch Selector Four Position Red
6007m-Series (Mini) Battery Switch Selector Make before break contact design allows switching between battery banks without power interruption Selector Switches battery bank 1 or battery bank 2 or both to a single load using one switch Features: Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface, front panel, or rear [...]
Electrical > Battery Management
Blue Sea 9002e e-Series Battery Switch Selector w/Alternator Field Disconnect
9002e e-Series Battery Switch Selector with Alternator Field Disconnect Features: Switches isolated battery banks to all loads or combines battery banks to all loads Includes AFD (Alternator Field Disconnect) Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel [...]