CURT LED Electrical Adapter - 7-Way RV Blade to 4 or 5-Way Flat Trailer 
Fluid Reservoir
This reservoir is meant for holding hydraulic pump fluid.
How to Use:
- Periodically, check the fluid level in HPU
- With the trim tabs completely retracted, the fluid level should be about 2″ from the bottom of the reservoir (approximately 22 ounces) refill, remove the Lexan cover and filler plug located at the front left-hand corner of the reservoir
- Fill with any type of automatic transmission fluid (ATF) only
- Brands running HPU with excess or a lack of fluid will not cause damage to the trim tab system
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
| Weight | 1 g |
|---|---|
| Dimensions | 9 × 7 × 5 cm |
Brand
Bennett Marine
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Boat Outfitting > Trim Tab Accessories
Lenco 101XD Extreme Duty Actuator – 12V – 2-1/4″ Stroke – 5/16″ Hardware
101 XD Actuator- 12 Volt- 2-1/4 Stroke with Mounting Hardware The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff [...]
Boat Outfitting > Trim Tab Accessories
Hydraulic Tubing – 20 foot coil WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with [...]
Boat Outfitting > Trim Tab Accessories
Hydraulic Power Unit A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover [...]
Boat Outfitting > Trim Tab Accessories
Lenco 101XD Extreme Duty Actuator – 12V – 2 1/4″ Stroke – 3/8″ Hardware
101 XD Actuator- 12 Volt- 2-1/4 Stroke with Mounting Hardware The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super [...]
Boat Outfitting > Trim Tab Accessories
Upper Hinge Bennett’s A1103 Upper Hinge of the A1101 Actuator Assembly. Fluid throws through the upper hinge at the top of the actuator – thus eliminating external hoses subject to damange. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive [...]
Boat Outfitting > Trim Tab Accessories
Insta-Trim Boat Leveler 12 Volt Solenoid Valve with White Wire. They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.
Boat Outfitting > Trim Tab Accessories
Boat Leveler 12vdc Universal Trim Tab Pump with Oil and Hose Fittings
Universal Motor Pump Pump has adjustable pressure relief valve set at 400psi. Builit in bypass so fluid circulates so that pump will not stall. Motor has thermal overload protection. Includes all necessary fittings for a 12 volt single cylinder system. Kit contains Biodegradable oil and funnel. Heavy duty solenoid vales that lock cylinder in place. [...]
Boat Outfitting > Trim Tab Accessories
101 Actuator- 12 Volt- 2-1/4 Stroke with Mounting Hardware The 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2.25 stroke. Overall length (tip to top) is 12.5 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. [...]