Wild River RECON Mossy Oak Compact Lighted Backpack w/o Trays 
ANDERSEN 12 ST FS Self-Tailing Manual Single Speed Winch - Full Stainless 
High Load Eye 6mm Bore
Available in six sizes. Manufactured in marine-grade aluminum with a hard anodized finish. These lightweight high-load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, and ast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm.
Ergonomically designed to maximize the strength and efficiency of the eye. With HV500 hard anodizing and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength-to-weight ratios, making them ideal for use as kickers, tweakers, genoa barber haulers, and anywhere where weight saving and strength are important.
Wear Resistance
The hard anodizing HV500 has amazing low friction properties. After over 300 hours on an abrasion test machine, no visual signs of wear on the anodized coating could be found.
Features:
- High load eye compared to a standard plain bearing block on average across the range
- Friction increased by only 15%
- Strength increased by 272%
- Weight reduced by 51%
- Data based on using 4mm D12 SK75 Dyneema core
| Weight | 0.1 g |
|---|---|
| Dimensions | 4 × 2 × 1 cm |
Brand
Barton Marine
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Sailing > Hardware
Mini Bailer – Outside Mount Flange Size: – 56 x 92mm (2-1/4 x 3-5/8″) The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing. ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service. Features:Effective and reliable [...]
Sailing > Hardware
Series 25 T-Track – Track End Cap – Black ‘Racing’ track has 25mm(63/64″) stop hole spacing for even more precise control of the car position and sheeting angle. Track Fastenings:5mm (3/16″) countersunk fasteners at 100mm (3-15/16″) centres Materials:Anodized alluminum alloy track
Sailing > Hardware
Narrow Saddle – 11.4mm(7/16″) Clearance Grade 316 Stainless Steel 37.3mm(1-7/16″) screw to screw length
Sailing > Hardware
Round Sail Track StopsRound 0.50″ dia. x 0.875″ (13 x 22mm) When it’s time to lower your sail you can rely on Davis’ Round Sail Track Stop to hold your sail and its slides in place on the mast and boom. Large knurled wheels are released with ease. Made of heavy-duty, black anodized aluminum and [...]
Sailing > Hardware
Ronstan Series 60 AP Sheave – Acetal Solid Bearing – 60mm (2-3/8″) OD
Series 60AP Rope Sheave – Acetal Solid Bearing – 60mm(2-3/8″) OD Ronstan’s range of Acetal sheaves is moulded from a specially modified ultra-violet resistant grade of material to provide a long service life in the tough marine environment. Acetal is well suited to the application, with characteristics of high strength and resistance to impact and [...]
Sail Slide – Internal Track – 22mm(7/8″) Wide x 42mm(1-21/32″) Long Impact Resistant, U.V. Stabilized NylonWhite
Sailing > Hardware
Large Bailer – Outside Mount Flange Size: – 80 x 142mm (3-3/16 x 5-9/16″) The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing. ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service. Features:Effective and reliable [...]
Sailing > Hardware
Tiller-Tamer Maintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and feel to the tiller handle. Does not interfere with automatic steering systems. No loss of cockpit space. No need to lash the tiller when boat is [...]