Blue Sea 8043 AC Main +3 Positions Toggle Circuit Breaker Panel - White Switches 
ARCO Marine Original Equipment Quality Replacement Tilt Trim Motor w/96" Leads - 2 Wire, 3-Bolt Mount 
Boomstrut – Silver/White for Boats 30-35'
Boomstrut 44010 is designed for boats up to 6m (20ft) in length with a maximum boom tip weight of 6.3kg (14 lbs). Working alongside the existing kicker or rope vang it creates upward lift on the boom to keep the desired sail shape even in light winds. Manufactured with white rods and Spectro Anodised boom & mast fittings. The uplift created means that the boom will not fall onto the boat when the sail is lowered or the topping lift is released or removed. Suitable to be used with wooden, carbon fiber, or aluminum spars.
Six sizes to suit yachts up to 12m/40ft LOA
Patented flexing spring provides fast response and a constant force for vang efficiency
The boomstrut’s lightweight, low-profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling the boom down with a conventional kicker causes the Boomstrut to flex; releasing straightens the rods, thereby lifting and supporting the boom.
Maintenance-free, durable design
Eliminates friction and sliding parts.
Improved performance
Less weight and windage.
Easy installation
There’s no need to replace your existing hardware – the Boomstrut mounts independently inside the existing kicking strap tackle.
Simple to follow instructions
The Boomstrut is supplied with complete fitting instructions and more comprehensive details are available here on our website.
Mast fitting can use existing luff groove
To eliminate drilling, the Boomstrut’s mast bracket can be slotted into your mast’s luff groove.
Contoured boom fitting
The Boomstrut’s boom bracket is contoured to fit both round and flat boom profiles.
Carefully designed & constructed
The Barton Boomstrut has been carefully designed and constructed to eliminate sharp edges, minimise parts and provide trouble-free installation and use.
All parts are from high grade stainless steel and black or grey anodised aluminium for good looks and durability. Spare parts available.
| Weight | 6.4 g |
|---|---|
| Dimensions | 55 × 4 × 4 cm |
Brand
Barton Marine
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Sailing > Rigging
Jaw/Jaw Toggle Nut Tubular Turnbuckle For those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment. Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging toggle. [...]
Sailing > Rigging
Slab Reefing KitSupplied with sliding blocks which are held in place with spring-loaded plungers. Manufactured from stainless steel and ‘Spectro’ anodised aluminium.Complete with sufficient length of ‘T’ Track and end stops. Supplied with 60cm of 25mm anodised ‘T’ Track For Yachts up to 8.5M (28′)
Series 32 I-Beam Car – Saddle Top – Rubber Stand-Up Pad – 76mm(3″) Strong, stainless steel bodies with flared sides and angled ball bearing wheels provide high load capacity and smooth operation. Applications:Mainsheet and self-tacking jib travellers on boats to 9m (28ft) Materials:Black Chromed Grade 316 stainless steel car bodiesGrade 316 stainless steel wheels and [...]
Sailing > Rigging
Lever Arm Crimper Tool C. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other [...]
Sailing > Rigging
Over Center Gate Hook with Splice Eye *Dyneema Line not included with fittings C. Sherman Johnson Marine’s Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now [...]
Sailing > Rigging
Tubular Turnbuckle with Splice Eye *Dyneema Line not included with fittings C. Sherman Johnson Marine’s Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ [...]
Sailing > Rigging
Toe Rail Folding Cleat The toe rail folding cleat makes a perfect movable, mid-ship cleat for spring lines, fenders, and more! This cleat is mountable on all aluminum toe rails. The rail is protected by a silicon rubber pad for rattle free installation. The cleat folds out of the way when not in use, the [...]
Sailing > Rigging
Ronstan Series 19 I-Beam Car – Adjustable Track Stop – Spring Loaded – 19mm (3/4″)
Series 19 I-Beam Car – Adjustable Track Stop – Spring Loaded – 25mm(1″) Track Fastenings: To suit 5mm(3/16″) countersunk fasteners at 100mm(3-15/16″) centres. Stop Holes: – 50mm (1-31/32″) centres.Track is supplied with RC7250-INS insulating inserts to eliminate corrosion between track and fasteners Minimum Curve RadiusFor 51mm(2″) car Min horizontal ‘A’ curve radius = 400mm (15-3/4″). [...]