Oval 2-Pin Base f/Angled Pole – Black
Part #: 91022-7
These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5 degree angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.
Features:
- Oval
- 2-Pin
- Base specifically for angled pole
- Black
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 0.2 g |
|---|---|
| Dimensions | 6 × 4 × 3 cm |
Brand
Attwood Marine
No accessories available for this product.
No videos available for this product.
Related products
Lighting > Accessories
Perko Threaded Collar Pole Light Mounting Base – 2 Pin – Stainless Steel
Threaded Collar Pole Light Mounting Base (2 Pin) – Plug-In Type Base5° Rake Construction Stainless Steel Black Plastic Waterproof snap-on cover Pigtail Leads Fits Figs. 1343, 1348, 1451, 1470, 1622 and 1656 SeriesAll-Round Pole Lights
Lighting > Accessories
Wire Harness f/10″-30″ Light Bar This 11′ wiring harness is designed to connect a single 10″-30″ LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof [...]
Lighting > Accessories
Lighted Rocker Switch This Switch features a lighted rocker with protective rubber boot and is a great addition to any RIGID Industries lighting system. This switch will fit all RIGID Industries wiring harnesses. This product requires a 3/4″ hole to mount. Features: Lighted for Better Visibility Water Resistant Protective Rubber Boot Works with All RIGID [...]
Lighting > Accessories
Wired Bridge Remote Power: 12 or 24 Volt (Hard Wired)Current draw (idle / in use):negligibleDimensions: 3.5″W x 2.25″H x .75″D (88 x 57 x 19 mm)Weight:2.12 oz (60g)Housing material: UV resistant PC/ASAButton material: Silicone (glow in the dark)Operating temp range: 5°F – 113°F (-15°C – 45°C) IP Rating: IP54 WARNING: This product can expose you [...]
Lighting > Accessories
Perko Locking Collar Pole Light Mounting Base – 2 Pin – Round
Locking Collar Pole Light Mounting Base (2 Pin) – Plug-In Type Base Construction Chrome Plated Brass Black Plastic Waterproof Snap-On Cover Pigtail Leads Fits Figs. 1343, 1347, 1348, 1400, 1440, 1450, 1451, 1452, 1460, 1470 Series All-Round Pole Lights and 1612 Series Bi-Color Pole Lights
Lighting > Accessories
URP-102 Point Pad™ for ACR Searchlights Control an ACR spotlight from any place on a vessel with fingertip control and accuracy This controller can be surface or flush mounted. In the Box: Point Pad™ URP-102 remote Flush and surface mount case Gaskets (surface and Flush) Mounting hardware Instruction manual *Sold as an Individual WARNING: This [...]
Lighting > Accessories
RIGID Industries Wire Harness High Power f/40″-50″ Light Bar
Wire Harness – High Power f/40″ – 50″ Light Bar This 13′ wiring harness is designed to connect a single 40″-50″ LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a [...]
Lighting > Accessories
Clamp-On Accessory Fits: 1.660″ PipeMounts: Horizontal/VerticalFinish: Silver Heavy duty Clamp-On brackets come ready to mount lights. These brackets are designed to fit standard size aluminum pipe. Constructed from marine grade aluminum, all brackets are anodized after fabrication for 100% anodized protection. These brackets come standard with bright silver anodized finish. Quickly attached or detached with [...]