Johnson/Evinrude Outboard Starter – 10 Tooth
The outboard starter will fit BRP-OMC, V6, V8 loop, 115-300 HP E-TEC, and 10-tooth drive gear.
ARCO advises using a fully charged battery – A weak battery can damage the starter and starter solenoid. And to also clean all connections – A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.
Features:
- Dynamically tested and packaged for out-of-the-box performance
- Nickel-coated and epoxy-painted to reduce corrosion
- Sealed to minimize water intrusion
- Designed for long life and optimum performance
- Armatures are tested to withstand 50 times operating voltages (12 volts)
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
BRP-OMC 391511
BRP-OMC 396235
BRP-OMC 397023
BRP-OMC 584799
BRP-OMC 586289
BRP-OMC 586411
BRP-OMC 586731
BRP-OMC 586890
BRP-OMC 586897
BRP-OMC 586957
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
| Weight | 8.3 g |
|---|---|
| Dimensions | 12 × 7 × 6 cm |
Brand
ARCO Marine
No accessories available for this product.
Literature
Quick Guide: Download PDF
Related products
Boat Outfitting > Engine Controls
Power A Mark II™Electronic Control System – Single Engine w/Trim The easy to install Power A Mark II™ control system provides fingertip operation of throttle and shift levers. Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to work on mechanically controlled as well as electronic and [...]
Boat Outfitting > Engine Controls
Power A EM12 – Electronic Control Package -Single Engine/Dual Station – Electronic Throttle/Mechanical Shift Power A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug’N Play connectivity Automatic engines synchronization Dock [...]
Boat Outfitting > Engine Controls
Power A MM12 – Electronic Control Package -Single Engine/Dual Station – Mechanical Throttle/Mechanical Shift Power A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug’N Play connectivity Automatic engines synchronization Dock [...]
Boat Outfitting > Engine Controls
Power Cable Extension Power extension cable for modules connection One each mechanical actuator or shift unit Length: 1M (3.3′)
Boat Outfitting > Engine Controls
Power A Mark II™Electronic Control System – Twin Engines w/out Trim The easy to install Power A Mark II™ control system provides fingertip operation of throttle and shift levers. Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to work on mechanically controlled as well as electronic [...]
Boat Outfitting > Engine Controls
Power A EE12 – Electronic Control Package -Single Engine/Dual Station – Electronic Throttle/Electronic Shift Power A Mark II™ Electronics Control Systems Private Protocol can bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J 1939 or NMEA 2000) Plug’N Play connectivity Automatic engines synchronization Dock [...]
Boat Outfitting > Engine Controls
Power A EE11 – Electronic Control Package -Single Engine/Single Station – Electronic Throttle/Electronic Shift Power A Mark II™ Electronics Control Systems Private Protocol CAN bus for data transmission Connection of multiple stations up to 4 controls Modular System Direct communication w/electronic engines (SAE J1939 or NMEA 2000) Plug’N Play connectivity Automatic engine synchronization Dock Assist [...]
Boat Outfitting > Engine Controls
Power A Mark II™Electronic Control System – Single Engine w/out Trim The easy to install Power A Mark II™ control system provides fingertip operation of throttle and shift levers. Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to work on mechanically controlled as well as electronic [...]