Ballast Pump FIP F4 12V
DC 12V F4-size ballast pump with a capacity of 55 L/min (14.25 GMP). This pump is used for ballast pumping of water between tanks.
Features:
- Pump body in brass, stainless steel shaft, premium ballast MC19 compound impeller, and seawater-resistant shaft seal
- Self-priming up to a 3m vertical lift
- Reversible flow direction
- 25A fuse reversing
- 16A normal duty
- Protected against ignition by surrounding flammable gases, ISO 8846
- Replacement premium ballast impeller in MC19 compound, PN 06-04-036
Specifications:
- Port Connections: 3/4 in. (19mm)
- Hose Connection: 1/2″ threaded BSP
- Weight: 0,8 kg/1 Lb
- Dimensions (L x H x W) (mm/in): 180/7 x 90/3.5 x 120/4.7
- Type: Reversible flow direction by changing polarity
- Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance
| Weight | 6.7 g |
|---|---|
| Dimensions | 10 × 6 × 5 cm |
Brand
Albin Group
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Ballast Pumps
Ballast King Bronze DC Pump without Switch – 15 GPM Wakeboard and Ski Boat Ballast Pump Features: Flow rate: 15 US gallons/min (57 Litres/min) Self-priming from dry up to 1.2m (4ft) Adds approx 125lbs (56kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer wearing parts. ISO 8846 MARINE [...]
Ballast SuperKing Pump with Deutsch Connector – 20 GPM When you’re having fun on a wakeboard, skis, or a tube, a bigger wake will create a more exhilarating ride. Xylem’s Jabsco ballast pumping systems, including the Ballast Puppy, Ballast King, and Ballast SuperKing, make taking on weight easy with tanks that rapidly fill at the [...]
Marine Plumbing & Ventilation > Ballast Pumps
Mastercraft Ballast Pump – 12V The Jabsco Wake/Surf boat Ballast pump is the direct replacement for Mastercraft part number 300249. The Jabsco pump comes standard with a green Run Dry Impeller and has the standard electrical quick connector already installed. Just connect your hoses, mount the pump in the boat, plug the power leads together [...]
Marine Plumbing & Ventilation > Ballast Pumps
Ballast Pump This Wake/Surf boat Ballast pump is the same one utilized by most major boat builders. The Jabsco pump comes standard with a green Run Dry Impeller. This pump has the standard electrical quick connector installed. Just connect your hoses, mount the pump into the boat, in its orginal position, plug the power leads [...]
Marine Plumbing & Ventilation > Ballast Pumps
Talulah Ballast Pump – 13.5 GPM – 12V Features: Built in Thermal Overheat Protection: Automatic reset after cooling down Monitor Filling: Tanks must have overfill protection Retrofit Possible: Important to have full bore hoses – without restriction Dry Run Impeller* Intermittent Duty Important to have good electric installation and proper wire size (Acc. to ISO [...]
Marine Plumbing & Ventilation > Ballast Pumps
Jabsco Ballast King Bronze DC Pump w/Reversing Switch – 15 GPM
Ballast King Bronze DC Pump with Reversing Switch – 15 GPM Wakeboard and Ski Boat Ballast Pump Features: Flow rate: 15 US gallons/min (57 Litres/min) Self-priming from dry up to 1.2m (4ft) Adds approx 125lbs (56kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer wearing parts. ISO 8846 [...]
Marine Plumbing & Ventilation > Ballast Pumps
Ballast Pump Today’s Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested Puppy Pumps lets these specialist craft rapidly take on and dump ballast, while modern electronics guard against dry running damage to the impeller The choice of [...]
Marine Plumbing & Ventilation > Ballast Pumps
Jabsco Ballast King Bronze DC Pump with Deutsch Connector – No Reversing Switch – 15 GPM
Ballast King Bronze DC Pump with Deutsch Connector – No Reversing Switch – 15 GPM Wakeboard and Ski Boat Ballast Pump Features: Flow rate: 15 US gallons/min (57 Litres/min) Self-priming from dry up to 1.2m (4ft) Adds approx 125lbs (56kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer [...]