Navico 9-Pin Dual Mix & Match Cable for Dual Element Transducers
For dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment
Mix and Match Cables for CHIRP Transducers
Many CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.
The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the equipment location. The short adapter cable connects to the transducer cable at one end and to the equipment at the other end.
Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer and its attached cable can be left in place and only the adapter cable needs to be replaced.
Note that CHIRP Mix and Match cables cannot be used with conventional 50/200kHz transducers.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
| Weight | 0.35 g |
|---|---|
| Dimensions | 9 × 6 × 1 cm |
Brand
Airmar
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Navigation & Instruments > Transducer Accessories
Furuno AIR-033-073 Adapter Cable, 10-Pin Transducer to 8-Pin Sounder
Adapter Cable, 10-Pin Transducer to 8-Pin Sounder WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Transducer Accessories
Transducer Y-Cable, 10-Pin (F) to 10-Pin (M) and 6-Pin (M) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Transducer Accessories
Maretron DST100 & DST110 Bronze Housing Kit – Transducer Not Included
The DST100’s bronze housing includies a blank plug to replace its sensor unit when the vessel will be docked for extended periods or trailered. This prevents damage to the sensor and reduces fouling growth. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause [...]
Marine Navigation & Instruments > Transducer Accessories
XT-12BL 12′ transducer extension cable. Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-337C DF, LMS-339C DF iGPS, LMS-480, X102C, X107C DF, X125, X126DF, X135, X136DF, X52, X59DF
Marine Navigation & Instruments > Transducer Accessories
The AIR-033-428 is a standard fairing block for transducers utilizing the Airmar B-744V housing. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Transducer Accessories
Mounting hardware for the XNT transom mount transducers. Includes a kick up bracket. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Transducer Accessories
DSM30 & DSM300 Transducer Adapter Cable The DSM30/DSM300 Transducer Adapter Cable allows you to utilize Raymarine’s wide offering of specialty and high performance in-hull, through-hull or transom mount transducers with our new MFDs with built-in sounder. This adapter is also perfect for occaisions where a new sounder-equipped Raymarine MFD is replacing both an old display [...]
Marine Navigation & Instruments > Transducer Accessories
Transducer Extension Cable, 5 meter Adds 5 meters of length to the stock transducer cable. Works with the L755, L760, L770, L1250, L1260, and DSM compatible systems.