Lumitec Caprera3 Spreader Light - White/Blue Dimming - Black Housing 
MM-8G Mix & Match Cable for 600W Non-CHIRP Transducers
Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.
The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end.
Both parts are needed for installation. If the user changes equipment brand at some later time, the transducer can be left in place and the adapter cable replaced.
Mix and Match 600W transducers include the B117, B45, B60, P319, P66*, P79, SS505, and SS60. (* not all models)
A 12m (40′) extension cable (part MM-5P-5P) is available with one male and one female 5-pin connector.
Note that 600W Mix and Match cables cannot be used with 1kw transducers.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
| Weight | 1 g |
|---|---|
| Dimensions | 7 × 6 × 2 cm |
Brand
Airmar
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Navigation & Instruments > Transducer Accessories
Clipper In-Hull Transducer Mounting Kit – Transducer Not Included
Complete kit for mounting depth transducer inside GRP hull.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Marine Navigation & Instruments > Transducer Accessories
XT-12BL 12′ transducer extension cable. Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-337C DF, LMS-339C DF iGPS, LMS-480, X102C, X107C DF, X125, X126DF, X135, X136DF, X52, X59DF
Marine Navigation & Instruments > Transducer Accessories
XT-20BL 20′ transducer extension cable. Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-337C DF, LMS-339C DF iGPS, LMS-480, X102C, X107C DF, X125, X126DF, X135, X136DF, X52, X59DF
Marine Navigation & Instruments > Transducer Accessories
Transducer Extension Cable, 5 meter Adds 5 meters of length to the stock transducer cable. Works with the L755, L760, L770, L1250, L1260, and DSM compatible systems.
Marine Navigation & Instruments > Transducer Accessories
7m Depth Transducer Extension Cable Spare 150kHz depth transducer with 7 meter cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Marine Navigation & Instruments > Transducer Accessories
SI-TEX Digital A Cable – Adapts Older SI-TEX Transducers to Current models
Adapts older SI-TEX transducers to current ones Digital A Cable8-pin Fuji (old type metal plug) to 8-pin CONXALL (plastic waterproof plug).
Marine Navigation & Instruments > Transducer Accessories
Maretron DST100 & DST110 Bronze Housing Kit – Transducer Not Included
The DST100’s bronze housing includies a blank plug to replace its sensor unit when the vessel will be docked for extended periods or trailered. This prevents damage to the sensor and reduces fouling growth. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause [...]
Marine Navigation & Instruments > Transducer Accessories
Transducer Y-Cable, 10-Pin (F) to 10-Pin (M) and 6-Pin (M) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.