Garmin 200/50kHz, 10/40 Deg, Plastic TM, Depth & Temp - 6-Pin 
Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP Transducers
Mix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable. The short pigtail attached to the transducer ends in an Airmar 5-pin male connector. The adapter cables have a matching Airmar 5-pin female connector at one end and the correct connector for a specific electronics brand at the other end.
Both parts are needed for installation. If the user changes equipment brand later, the transducer can be left in place and the adapter cable replaced.
*600W Mix and Match cables cannot be used with 1kw transducers or CHIRP transducers.
Features:
- 10-Pin
- For Furuno 10-Pin equipment
Brand
Airmar
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Navigation & Instruments > Transducer Accessories
The AIR-033-391 is a high-performance fairing block for transducers utilizing the Airmar B-260 housing. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Transducer Accessories
7m Depth Transducer Extension Cable Spare 150kHz depth transducer with 7 meter cable.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Marine Navigation & Instruments > Transducer Accessories
T122 Micronet Wireless NMEA Interface Key Features Only 135g (0.3lbs) 9 – 24 V external power supply NMEA 0183 Ver 2.3 2 inputs and 1 output External Alarm connector Product DescriptionThis interface enables sailors to integrate other marine electronics into any of the Micronet instrument range. Compatible with instruments using the NMEA language, the Wireless [...]
Marine Navigation & Instruments > Transducer Accessories
Clipper In-Hull Transducer Mounting Kit – Transducer Not Included
Complete kit for mounting depth transducer inside GRP hull.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Marine Navigation & Instruments > Transducer Accessories
Garmin Transducer Adapter f/echo™ Female 4-Pin to Male 6-Pin
Female 4-pin to Male 6-pin Transducer Adapter for echo™ Series This transducer adapter allows you to use your existing 6-pin transducer with your echo™ series fishfinder. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go [...]
Marine Navigation & Instruments > Transducer Accessories
XT-12BL 12′ transducer extension cable. Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-337C DF, LMS-339C DF iGPS, LMS-480, X102C, X107C DF, X125, X126DF, X135, X136DF, X52, X59DF
Marine Navigation & Instruments > Transducer Accessories
Lowrance 10EX-BLK 9-pin Extension Cable f/LSS-1 or LSS-2 Transducer
Extension Cable For LSS-1 or LSS-2 Transducer For use specifically with Lowrance’s LSS-1 or LSS-2 Transducer. If the 20′ transducer cable is not long enough, the 10′ extension cable is available.
Marine Navigation & Instruments > Transducer Accessories
Mounting hardware for the XNT transom mount transducers. Includes a kick up bracket. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.