Blue Sea 2104 PowerBar 600AMP Cable Connector 4 x 3/8 16 Stud Terminal 
175WR-4 Transducer Housing Wrench
A single-handed wrench that holds the main thru-hull housing via the ‘wrench flats’ on the top of the housing to facilitate tightening of the hull nut.
Use wrench 164WR-2 or 164WR-3 for the hull nut.
For use with:
- B164
- B175
- SS164
- SS264
IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4″. If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16″.
| Weight | 0.6 g |
|---|---|
| Dimensions | 10 × 5 × 1 cm |
Brand
Airmar
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Navigation & Instruments > Transducer Accessories
MHX-ICE Ice Flasher Transducer Mounting Hardware The MHX ICE is a kit that provides the float and stopper for XI 9 19 and XI 9 20 ICE transducers. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. [...]
Marine Navigation & Instruments > Transducer Accessories
XT-20BL 20′ transducer extension cable. Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-337C DF, LMS-339C DF iGPS, LMS-480, X102C, X107C DF, X125, X126DF, X135, X136DF, X52, X59DF
Marine Navigation & Instruments > Transducer Accessories
DSM30 & DSM300 Transducer Adapter Cable The DSM30/DSM300 Transducer Adapter Cable allows you to utilize Raymarine’s wide offering of specialty and high performance in-hull, through-hull or transom mount transducers with our new MFDs with built-in sounder. This adapter is also perfect for occaisions where a new sounder-equipped Raymarine MFD is replacing both an old display [...]
Marine Navigation & Instruments > Transducer Accessories
Lowrance 10EX-BLK 9-pin Extension Cable f/LSS-1 or LSS-2 Transducer
Extension Cable For LSS-1 or LSS-2 Transducer For use specifically with Lowrance’s LSS-1 or LSS-2 Transducer. If the 20′ transducer cable is not long enough, the 10′ extension cable is available.
Marine Navigation & Instruments > Transducer Accessories
E66023 Fairing Block f/ B744V This E66023 is a fairing block designed for use with the Raymarine B744V tranducer.
Marine Navigation & Instruments > Transducer Accessories
The AIR-033-226 is a standard fairing block for transducers utilizing the Airmar B-256 housing. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Transducer Accessories
50 Meter Cable Kit w/ Junction Box, FI5001 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Transducer Accessories
Maretron DST100 & DST110 Bronze Housing Kit – Transducer Not Included
The DST100’s bronze housing includies a blank plug to replace its sensor unit when the vessel will be docked for extended periods or trailered. This prevents damage to the sensor and reduces fouling growth. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause [...]