Marine Navigation & Instruments > Transducers
Airmar B265LH Bronze Chirp Thru Hull 1kW w/Fairing Block – Requires Mix and Match Cable
B265LH Bronze Chirp Thru Hull 1kW with Fairing Block Requires Mix and Match Cable Imagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz, and Cod—175 kHz. Now imagine tuning your fish finder to these frequencies, marking the fish precisely on the screen, then catching them! With [...]
Marine Navigation & Instruments > Transducers
B265LH 1kW Thru Hull Transducer Features:Bronze1kWTemperature Included
Marine Navigation & Instruments > Transducers
Furuno TM275LHW Transom Mount CHIRP Transducer w/Temp – 12-Pin Connector f/TZT3
TM275LHW Transom Mount CHIRP Transducer with Temp – 12-Pin Connector for TZT3 The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the transom mounted TM275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the TM275LH-W really delivers. Unlike [...]
Marine Navigation & Instruments > Transducers
Transom Mount TM265LH 1kw Chirp Transducer for CP450C Features: Depth/Temp Transom Mount Urethane CP450C Plug on Cable Frequency: L=42-65 kHz, H=130-210 kHz Power 1kW
Marine Navigation & Instruments > Transducers
Raymarine M265LH 1kW Urethane In-Hull Transducer w/In-Hull Mounting Kit
M265LH 1kW Urethane In-Hull Transducer with In-Hull Mounting Kit The M265 is an outstanding in-hull option with 8 internal ceramics and up to 117kHz of total CHIRP range. The in-hull installation eliminates the need to drill any holes in the hull, while accommodating a large range of deadrise angles. The medium-frequency benefits include the ability [...]
Marine Navigation & Instruments > Transducers
Garmin B265LM Bronze Thru-Hull Mount Transducer w/Depth & Temperature
B265LM Bronze Thru-Hull Mount Transducer with Depth & Temperature Garmin’s best performing 1 kW thru-hull transducer, this bare wire mount performs well in deep water and has exceptional bottom and water column detail. This transducer has a depth of 3,000 ft; an operating frequency of 42 to 65 kHz and 85 to 135 kHz; a [...]
Marine Navigation & Instruments > Transducers
B260 Bronze Thru Hull The B260 will enhance fish detection on virtually all of today’sfish finders. High-performance has been redefined with itsBroadband Ceramic Technology. The narrow, 6 degree beam 200 kHzceramic will give you excellent resolution and crisp image detailneeded for bottom fishing. The B260’s low ringing is perfect forfinding fish holding tight to the [...]
Marine Navigation & Instruments > Transducers
Airmar TM265C-LH Transom Mount CHIRP – 1kW Transducer – Requires Mix and Match Cable
TM265C-LH Transom Mount CHIRP – 1kW Transducer Transom-mounted 1kW dual-band CHIRP fishfinder transducer. The TM265 is available in the Low/Medium and Low/High bands. A Low/High widebeam model exists with the designation TM275. Specifications: Low/High Bands 1000 Watts Transom Mount Housing: Urethane Requires Mix and Match Cable for the Sounder its going into This product may [...]
Marine Navigation & Instruments > Transducers
Side Scan Paired Thru-Hull Transducers for TZT3 The 225T-PR904 is a set of paired Thru-Hull transducers that work with the built-in CHIRP Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD. Features: 150 watts on each side CHIRP 220-240kHz Stainless Steel Thru-Hull with Temperature 12-pin connector 12m (40ft) cable Specifications: Install Type: Thru-Hull [...]
Marine Navigation & Instruments > Transducers
Rubber Coated Transducer, 5kW (No Plug) 5 kW 200 kHz 4 degree Beam Angle 11 lbs. Rubber Coated – Tank Mounted 15-Meter Cable, no connector provided WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go [...]
Marine Navigation & Instruments > Transducers
Raymarine B175L Bronze Low Profile Thru Hull 20 degree Tilted Element Transducer – 1kW
B175L Bronze Low Profile Thru Hull 20° Tilted Element Transducer 1kW FeaturesMaterial: BronzeFor use with CP450C or CP470 Chirp Sonar ModulePower (RMS): 1KwMax Depth(ft): 2,500Frequency (khZ): 40-60Beam Width(L/H): 32°-21°Records: Depth / TemperatureApproved Hull Material: Fiberglass / WoodCable Length (Ft/M): 33ft / 10MSupported Deadrise / Transom Angles: 16-24° DeadriseNote: Using a Single B175 or B75 requires [...]
Marine Navigation & Instruments > Transducers
GT51M-THP – Stainless Steel Thru-Hull Pair DownVü/SideVü 500 W (CHIRP 260/455 kHz) Traditional 600 W (Mid-band CHIRP 80-160 kHz) Transducers with Temp (12-Pin) This thru-hull transducer pair provides ultra-clear sonar pictures of objects, structure and fish that pass below your boat. These traditional CHIRP sonar and CHIRP DownVü/SideVü transducers are optimized for depth performance and rough conditions. [...]