Marine Navigation & Instruments > NMEA Cables & Sensors
Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
NAC-MRD2MBL NMEA 2000 network adapter cable. Adapts a blue connector device to a red connector network. Works with: NMEA 2000 Compliant Units
Marine Navigation & Instruments > NMEA Cables & Sensors
NAC-FRD2FBL NMEA network adapter cable. Adapts red connector devices to a blue connector network. Works with: NMEA 2000 Compliant Units
Marine Navigation & Instruments > NMEA Cables & Sensors
Maretron NM-CF Mini Male to Micro Female Reducer The reducer is used to change from a Mini cable to Micro or Mid cable. For example, one end of the network might be terminated at the top of the mast but it may not be desireable to run a Mini trunk cable up the mast. In [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Maretron Mini Double Ended Cordset – Male to Female – 1M – Grey
Mini Double Ended Cordset – Male to Female – 1M – Grey Double-ended cordsets are used for trunk or drop lines and make for a secure connection and simple time saving installation. The connectors are keyed for error-free connection and are waterproof for continued operation even while submerged in the bilge. Rugged, IP68 rated connectors [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Maretron NM-NM Mini Gender Changer, Male to Male Maretron cables have a male connector on one end and a female connector on the other end. Normally, the male connector points back towards the network power supply, but on some occasions, this gets reversed and a gender changer can be used to get back to the [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Mini Gender Changers Maretron cables have a male connector on one end and a female connector on the other end. Normally, the male connector points back towards the network power supply, but on some occasions, this gets reversed and a gender changer can be used to get back to the desired connector type. Waterproof seals [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Mini 90° Male to Female Connector The Mini Elbow is used in spots where it is impossible to bend a cordset around tight corners. The elbow easily connects to a tee or double-ended cordsets making 90 degree turns practical at the end or anywhere along the line. Mounting hole for secure fastening of cable system [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
NMEA 2000 Drop Cable – 2M This 2 meter NMEA 2000 drop cable offers connection between a NMEA 2000 device and T-connector. The couplers connect to the corresponding T-connectors, creating a simplified installation. Features: Includes (1) NMEA 2000 drop cable Cable length: 2 meter (3.25 ft) 1-Year Limited Warranty
Marine Navigation & Instruments > NMEA Cables & Sensors
N2KEXT-6RD 6′ NMEA 2000 Cable 6′ NMEA 2000 Cable
Marine Navigation & Instruments > NMEA Cables & Sensors
Maretron Mid Double-Ended Cordset – 5 M Blue Mechanical: Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray Molded Body Mat/Color: Thermoplastic PUR/Blue-Gray Contact Mat/Plating: Brass/Gold Coupling Nut Mat/Plating: Brass/Nickel Connector Outside Diameter: 0.59″ Electrical Current Rating: 4.0 Amps Voltage Rating: 250 V Cable Outer Jacket Mat/Color: PVC/Gray Conductor Insulation Material: PE (data pair), PVC (power pair) Number of [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
NMEA 2000 Drop Cable – 5M Ancor’s NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop cables are smaller in diameter and more flexible than backbone cables for easy connection to [...]