Boat Outfitting > Tools
Weld Mount AT-850 Square Mixing Tips for AT-8040, AT-2010 & 4020 ADHESIVES 4″ LONG – 10PK
AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives – 4″ – Case of 10 Weld Mount’s AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It’s unique design eliminates any possibility of the cartridge plugging up as the entry is separated. Features: Square Mixing Tip 4″ Long Case of 10
Boat Outfitting > Tools
AT-85810 Mixing Tips *10-Pack Its unique design eliminates any possibility of the cartridge plugging up as the entry is separated. This prevents cross-contamination of the two parts, keeping the cartridge ends clean and clear for multiple uses. AT-858 tip is for use with: AT-880
Boat Outfitting > Tools,Boat Outfitting > Adhesive/Sealants
Weld Mount AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & 6030
AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 Adhesives AT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhesives. (sold separately)
Boat Outfitting > Tools
Weld Mount AT-13 – 10:1 Gun Plunger f/AT-6030 Adhesive – Single
10:1 Gun Plunger for AT-6030 Adhesive Single Pack gun plunger for AT-6030 Adhesive (sold separately)
Boat Outfitting > Tools,Boat Outfitting > Adhesives/Sealants/Tapes
8040 Acrylic Adhesive with Plunger AT-8040 is a good general-purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-8040 cures in 10-12 minutes, has a 6-minute working time and develops working strength in 40 [...]
Boat Outfitting > Tools
Retail Wire Tie Kit with AT-8040 Adhesive The AT-1050 kit contains one manual mix tube of AT-8040 adhesive and 25 pieces of AT-5 white wire tie mount. Just enough parts for a small wiring job and an ideal introduction to Weld Mount. AT-1050 Kit Contains: AT-8040 Adhesive (25) Pieces AT-5 White Tie Mount (1) Plastic [...]
Boat Outfitting > Tools
Weld Mount .75″ Tall Stainless Stud w/#10 x 24 Threads – Qty. 10
.75″ Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4″ x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the [...]
Boat Outfitting > Tools
Weld Mount AT-651 Mixing Tips f/Use w/AT-6031 Adhesive – Qty. 10
AT-651 Mixing Tips for Use with AT-6031 Adhesive – Qty. 10 Weld Mount’s AT-651 mixing tip is designed specifically for use with Weld Mount’s AT-6031 adhesive. AT-6031 is a 10 to 1 adhesive that requires a mixing tip with more mixing chambers to ensure proper mixing before use. These mixing tips minimize waste compared with [...]
Boat Outfitting > Tools,Boat Outfitting > Adhesive/Sealants
AT-6031 Metal Bond Adhesive AT-6031 is a 10-to-1 metal bonding adhesive. It has high viscosity (cures in 10–12 minutes), has a 6-minute working time, and develops working strength in 40 minutes. AT-6031 develops more than 2,500 lbs. (psi) of tensile strength on most metal surfaces, making it an ideal alternative to welding in many applications. [...]