Boat Outfitting > Tools
Weld Mount 304 Stainless Standoff 1.25″ Base 5/16 x 18 Thread .75″ Tall – 6-Pack
304 Stainless Standoff 1.25″ Base 5/16 x 18 Thread .75″ Tall – 6-Pack Weld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are mounted with our unique non-sag acrylic adhesives which hold the parts in place on a vertical or overhead surface providing a permanent [...]
Boat Outfitting > Tools
Weld Mount Stainless Steel Stud 1.25″ Base #10 x 24 Thread 2.5″ Tall
Stainless Steel Stud 1.25″ Base #10 x 24 Thread 2.5″ Tall Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
Boat Outfitting > Tools
Weld Mount Stainless Steel Stud 1.25″ Base 1/4 x 20 Threads 2.25″ Tall – 10 Pieces
Stainless Steel Stud 1.25″ Base 1/4 x 20 Threads 2.25″ Tall – 10 Pieces The stainless steel stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs in shear. All studs have 1/4 x 20 threads. Use for hanging panels, through [...]
Boat Outfitting > Tools
Weld Mount 2.5″ Tall Stainless Stud w/1/4″ x 20 Threads – Qty.10
2.5″ Tall Stainless Stud w/1/4″ x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4″ x 20 threads. Use for hanging panels, through deck mounts and many other uses.
Boat Outfitting > Tools
Weld Mount 2″ Tall Stainless Stud w/1/4″ x 20 Threads – Qty. 10
2″ Tall Stainless Stud w/1/4″ x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4″ x 20 threads. Use for hanging panels, through deck mounts and many other uses.
Boat Outfitting > Tools
Weld Mount AT-3B Small Black Nylon Wire Tie Mount – Qty. 100
Black Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20″. Average pull strength is about 50 lbs. The square base measures .44″ wide. Use this smaller [...]
Boat Outfitting > Tools
White Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20″. Average pull strength is about 50 lbs. The square base measures .44″ wide. Use this smaller [...]
Boat Outfitting > Tools
Weld Mount Single Poly Clamp f/1/4″ x 20 Studs – 1″ OD – Requires 1.75″ Stud – Qty. 25
Single Clamp Each clamp is designed to be mounted using 1/4″ x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 1.0″ Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65″ x 0.79″ x 1.18″ Recommended Clamp Spacing: 5′
Boat Outfitting > Tools
Weld Mount Single Poly Clamp f/1/4″ x 20 Studs – 3/4″ OD – Requires 1.75″ Stud – Qty. 25
Single Clamp Each clamp is designed to be mounted using 1/4″ x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.75″ Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65″ x 0.79″ x 1.18″ Recommended Clamp Spacing: 4′
Boat Outfitting > Tools
Weld Mount White Nylon 1.25″ Stud Cover f/1/4″ x 20 Stud – Qty. 50
Stud Covers For applications such as engine rooms where our stainless steel studs may be visible, use these press-on white nylon caps to improve the appearance of the installation. The caps are “Matterhorn White”. Install the caps before bonding up the studs. 1.25″ Diameter.
Marine Plumbing & Ventilation > Accessories,Boat Outfitting > Tools
Weld Mount Double Poly Clamp f/1/4″ x 20 Studs – 3/8″ OD – Requires 1″ Stud – Qty. 25
Double Clamp Each clamp is designed to be mounted using 1/4″ x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.375″ Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.54″ x 0.63″ x 0.56″ Recommended Clamp Spacing: 3′
Boat Outfitting > Tools,Boat Outfitting > Adhesive/Sealants
No Slide Metal/Composite Bonder Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping. Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in [...]