Marine Plumbing & Ventilation > Accessories,Boat Outfitting > Tools
Weld Mount Double Poly Clamp f/1/4″ x 20 Studs – 1″ OD – Requires 1.75″ Stud – Qty. 25
Double Clamp Each clamp is designed to be mounted using 1/4″ x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 1″ Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65″ x 0.79″ x 1.18″ Recommended Clamp Spacing: 5′
Marine Plumbing & Ventilation > Accessories,Boat Outfitting > Tools
Weld Mount Double Poly Clamp f/1/4″ x 20 Studs – 3/4″ OD – Requires 1.75″ Stud – Qty. 25
Double Clamp Each clamp is designed to be mounted using 1/4″ x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.75″ Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65″ x 0.79″ x 1.18″ Recommended Clamp Spacing: 4′
Boat Outfitting > Tools
Aluminum Base Wire Tie Mount This tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a #5 wire tie and has an average pull strength [...]
Boat Outfitting > Tools
Weld Mount Stainless Nut Plate w/1/4″ x 20 Threads – Qty. 10
Floating Nut Plates Our floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesive. The fixture keeps the threads clean during bonding. Remove the rubber fixture when you are ready to make up the assembly. The [...]
Boat Outfitting > Tools
Floating Nut Plates Our floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesive. The fixture keeps the threads clean during bonding. Remove the rubber fixture when you are ready to make up the assembly. The [...]
Boat Outfitting > Tools
Weld Mount .75″ Tall Stainless Standoff Through Thread w/5/16″ x 8 Threads – Qty. 6
.75″ Tall Stainless Standoff w/5/16″ x 8 Threads – Through-Thread Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in [...]
Boat Outfitting > Tools
Weld Mount 2″ Tall Stainless Stud w/3/8″ x 16 Threads – Qty. 5
2″ Tall Stainless Stud w/3/8″ x 16 Thread The HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2″ base plate creating a very strong part. Manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs. and shear strength is 1,500 lbs.
Boat Outfitting > Tools
Weld Mount AT-5B Large Black Nylon Wire Tie Mount – Qty. 100
Black Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It’s designed for a #5 wire tie and has an average pull strength of 150 lbs. It’s approved for submerged bilge applications. Stop putting plywood in your [...]
Boat Outfitting > Tools
White Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It’s designed for a #5 wire tie and has an average pull strength of 150 lbs. It’s approved for submerged bilge applications. Stop putting plywood in your [...]
Boat Outfitting > Tools
Weld Mount Stainless Steel Standoff 1.25″ Base 1/4″ x 20 Thread .75 Tall – 6-Pack
Stainless Steel Standoff 1.25″ Base 1/4″ x 20 Thread .75″ Tall – 6-Pack Unlike the SOB standoffs which have a blind thread, the SOT series standoffshave a thread which runs all the way through the barrel of the standoff.This allows the standoff to be mounted from either side of the base. Theseparts are manufactured in [...]
Marine Plumbing & Ventilation > Accessories,Boat Outfitting > Tools
Weld Mount Double Poly Clamp f/1/4″ x 20 Studs – 5/8″ OD – Requires 1.5″ Stud – Qty. 25
Double Clamp Each clamp is designed to be mounted using 1/4″ x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.625″ Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39″ x 0.79″ x 0.89″ Recommended Clamp Spacing: 4′
Marine Plumbing & Ventilation > Accessories,Boat Outfitting > Tools
Weld Mount Double Poly Clamp f/1/4″ x 20 Studs – 1/2″ OD – Requires 1.5″ Stud – Qty. 25
Double Clamp Each clamp is designed to be mounted using 1/4″ x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.5″ Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 2.08″ x 0.79″ x 0.89″ Recommended Clamp Spacing: 4′