Electrical > DC to DC Converters
24-12-3 DC Converter Convert 17-32 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.) Features: Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating The heat generated by semi-conductors is extracted and [...]
Electrical > Accessories
ERC-12-15 Emergency Relay The Emergency Relay/Charger is a device for assuring immediate backup power to communications equipment in the event AC power is temporarily lost to the power supply or the supply fails. In addition, it will allow the power supply to act as a “trickle” battery charger without any additional modification. When loss of [...]
Electrical > Accessories
APS-70 Automatic Power Selector – 70A The Automatic Power Selector (APS) is a solid-state device that enables the installation of a seamless, redundant power system for critical electronic loads. It selects the higher voltage of two independent DC power sources and routes power to the load. Should one source falter or fail, the other will [...]
Electrical > Electrical Panels
AC-II Panel Essential control and protection whenever AC from shore power or generators is on board. A double-pole master breaker with a power-on indicator light protects both the hot and neutral legs of the AC circuit. A reverse polarity light provides a clear warning when wiring is reversed and poses a shock hazard. AC-II has [...]
Electrical > Battery Isolators
2-3-70 Battery Isolator This heavy-duty isolator allows charging multiple batteries automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt negative ground DC systems. Features: Conservatively rated diodes and a [...]
Electrical > Switches & Accessories
SS Switch – 3 AC Selector Switch This AC source selector switch is an essential item for any vessel with an on-board AC generator and/or inverter. By isolating power source inputs, the switch eliminates the safety hazard and/or damage that can occur if two AC sources are applied to the same circuit simultaneously. The switch [...]
Electrical > Busbars, Connectors & Insulators
BB-8 Bus Bar Ideal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges. Features: Accommodate 5/16″ ring terminals Insulated base (reinforced nylon resin with a clear [...]
Electrical > Electrical Panels
ACCY-IBX Blank Panel This versatile panel is ideal when only a limited number of electrical circuits are needed or for larger systems where their modular design makes for an easy and attractive expansion of existing system capacity. Stock panels with breakers installed come standard with DC indicator lights but may be specially ordered with AC [...]
Electrical > Accessories
PC-25 Power Conditioner Noise Filter The interference or electronic “noise” generated by alternators, ignition systems, motors, etc. can render a vehicle or vessel’s radio or other electronic equipment virtually useless. This interference takes the form of popping or static on radios or audio gear and garbled images or “hashes” on video displays. These specialized filters [...]
Boat Outfitting > Accessories
GS-2-25 Grounding Strap – 2″ x 25′ This grounding strap is an ideal conductor for RF grounding of SSB radios and other noise-sensitive transceivers, for bonding thru-hulls, etc. Features: Flexible (easily conforms to vessel contours) .01 in. (25mm) thick Specifications: Width (in./cm): 2/5.1 Length (ft./m): 25/8 Weight (lbs/kg): 3/1.4
Electrical > Busbars, Connectors & Insulators
BB-5 Bus Bar Ideal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. center in 1/4 in. thick copper bar for common connection or distribution of large wire gauges. Features: Accommodate 5/16″ ring terminals Insulated base (reinforced nylon resin with a clear [...]
Electrical > Busbars, Connectors & Insulators
BB-2/8 Bus Bar Ideal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. centers in 1/4 in. thick copper bar for common connection or distribution of large wire gauges. Features: Accommodate 5/16″ ring terminals Insulated base (reinforced nylon resin with a clear [...]