Marine Navigation & Instruments > NMEA Cables & Sensors,Boat Outfitting > Accessories
Ultrasonic Wind & Weather Antenna Maretron’s outdoor weather station measures wind speed and direction, air temperature, barometric pressure, and relative humidity. The wind measurement is performed using ultrasonic sensors, which means there are no moving parts to wear out or get caught in the rigging. The WSO200 accurately measures wind speed and direction under a [...]
Marine Navigation & Instruments > Instruments
4.1" High Bright Color Display – Black Maretron’s DSM410 is a 4.1” high-resolution sunlight viewable color display that interprets and displays NMEA 2000® instrument, navigation, and vessel monitoring data. The DSM410 is a user friendly dedicated marine display with custom screen configurations and an easy-to-use five-key illuminated keypad. In addition to the monitoring and display [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Fuel Flow Sensor – 25-500 LPH/6.6-132 GPH Features:Operating Temperature: -40°C to 80°C (-40°F to 176°F)Storage Temperature: -65°C to 170°C (-85°F to 338°F)Port Size: 1/4″ NPT FemaleCable Length: 1M (3.28 ft)Maximum Viscosity: 1000 cPsPressure: 68.95 Bar (1000 PSI)Strainer Size: 200 Mesh (If not already installed after fuel filter) WARNING: This product can expose you to chemicals [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Fuel Flow Sensor – 2-100 LPH Features:Flow Range: 2 LPH to 100 LPH (0.53 GPH to 26.4 GPH)All M1AR fuel flow sensor accessories for the FFM100 are fitted with 1/4″ NPT female threadsNominal K Factor: 1000 pulses/L (3785.4 pulses/Gal)Cable Length: 1m (3.28′)Strainer Size: 200 Mesh (If not already installed after fuel filter)Port Size: 1/4″ NPT [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Specifications Overall Outer Jacket Mat/Color: PVC/Gray – DG1 PVC/Blue – DB1 Insulation Material: PE (data wires), PVC (power wires) Construction: 2×16 (1.29mm) AWG, 2×20 (0.81mm) AWG, 20 (0.81mm) AWG Drain Wire Shielding (3 levels): Foil (overall), Foil (power pair), Foil (data pair) Power Pair Wire: 2×16 (1.29mm) AWG Resistance/Conductor: 4.1 Ohms/1000 ft max Max Amperage: [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Specifications Overall Outer Jacket Mat/Color: PVC/Gray – DG1 PVC/Blue – DB1 Insulation Material: PE (data wires), PVC (power wires) Construction: 2×16 (1.29mm) AWG, 2×20 (0.81mm) AWG, 20 (0.81mm) AWG Drain Wire Shielding (3 levels): Foil (overall), Foil (power pair), Foil (data pair) Power Pair Wire: 2×16 (1.29mm) AWG Resistance/Conductor: 4.1 Ohms/1000 ft max Max Amperage: [...]
Marine Navigation & Instruments > Transducers
Mareton DST110 Smart™ Retractable Depth/Speed/Temperature Transducer The DST110 delivers precise digital depth, accurate speed and exact water temperature even at speeds above 40 knots – all with no programming or calibration necessary. Its patented Smart™ Sensor Technology, retractable and removable sensor, and NMEA 2000® network connectivity make the DST110 easy to interpre, easy to install [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Maretron’s DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panelts, and wind generators. The DCM100 can also be used to monitor DC loads [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Submersible Pressure Transducer – 0 to 5 PSI The submersible pressure transducers are used together with Maretron’s Fluid Pressure Monitor (FPM100), whichallows tank fluid level to be broadcast over an NMEA 2000® network where it can be monitored from any compatible NMEA 2000® display. When used together with Maretron displays, alerts can be set so [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Micro Bulk Cable Single Piece – 100M Spool Micro bulk cable is primarily used as drop cable, but it can also be used as the trunk line depending on network power requirements. Bulk cable with field-attachable connectors allows for maximum flexibility as cables can be made on the job to exact lengths. Features: Single Piece [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Current Transducer with Cable – 400 Amp Maretron’s Current Transducer is used specifically with Maretron’s ACM100 Alternating Current Monitor. Features:400 AmpIncludes Cable WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > NMEA Cables & Sensors
CLM100 Current Loop Monitor Maretron’s CLM100 converts commercially available 4-20mA current loop transducers into digital data so a wide variety of information can be displayed on Maretron displays. Numerous 4-20mA current loop transducers are supported by the CLM100 including transducers for monitoring DC voltage and current, flow rate, distance, linear velocity and acceleration, angle, angular [...]