Marine Plumbing & Ventilation > Bilge Pumps
Amazon Universal Manual Bilge Pump Features: Connections: – for 38 mm (1½ “) bore hose Dimensions: – 240mm long, 210mm wide, 150mm high, with 260mm handle (nominal dimensions for variable pump configuration) Output: – up to 100 litres/minute (22 gallons/minute) Flow direction reversible by exchanging inlet and outlet ports Quick-release clamp ring for rapid disassembly Optional through-deck kit [...]
Marine Plumbing & Ventilation > Blowers & Heaters
Flexmount Blower High volume air intake or extraction blowers for engine room, fuel compartment, galley or heads Features: Flexmounting for 360° adjustable outlet Slip-on inlet and outlet ducting connection Low current draw Dimensionally stable quiet running Delrin rotors Corrosion resistant materials throughout Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection) ISO 9097 MARINE [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Par-Max 2 Water Pressure Pump – 12V – 2 GPM – 35 PSI HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps [...]
Marine Plumbing & Ventilation > Accessories
18920-9043 Service Kit for 31600, 31620, 31630 Pumps Contains: Diaphragms Valves Clips Compatible Series: 31600-Series 31620-Series 31630-Series 42755-Series
Marine Plumbing & Ventilation > Impellers
Impeller Kit Material:NeopreneDrive Type:Spline DriveNumber of Blades:12Dimensions:Diameter:3-3/4″Shaft Width:1″Shaft Diameter:3-9/16″Insert Material:Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once [...]
Marine Plumbing & Ventilation > Accessories
Vented Loop Solenoid Valve for 37010 Series Toilet When installing a vented loop in the inlet hose, it is recommended that a Vented Loop Solenoid Valve (37068-2000) is connected to the vent air inlet to ensure maximum electric toilet performance and prime-ability. Connect the brass port of the valve (remove plastic filter, if installed) with [...]
Marine Plumbing & Ventilation > Blowers & Heaters
DC 105 CFM Flangemount 3″ Blowers Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately [...]
Marine Plumbing & Ventilation > Impellers
Impeller Kit Material:NitrileDrive Type:Ding Drive – KeywayNumber of Blades:12Dimensions:Diameter:2-1/4″Shaft Width:1/2″Shaft Diameter:1-1/4″Insert Material:Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Jabsco Par-Max HD3 Heavy Duty Water Pressure Pump – 12V – 3 GPM – 40 PSI
Par-Max HD3 Heavy Duty Water Pressure Pump – 12V – 3 GPM – 40 PSI HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Par-Max 1 Water Pressure Pump – 12V – 1 GPM – 35 PSI HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps [...]
Marine Plumbing & Ventilation > Accessories,Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Accumulator Tank This Accumulator Tank is intended for installation in any pumped water system controlled by a pressure switch. For example, PAR-MATE 2.5 or any Jabsco pressure pumps as found in boats, RV’s, motor caravans, coaches and similar applications. The Accumulator Tank smoothes water flow and reduces on/off cycling of the pump by lessening the [...]
Marine Plumbing & Ventilation > Bilge Pumps
Handy Boy Utility Pump Versatile polished brass multi-purpose hand pump Drain, fill or top up engine and gearbox oil Overcomes problem of hard to reach drain plugs and filler caps Oil and corrosion resistant brass neoprene construction with up to 1 1/2 GPM output 1001 other uses on any boat WARNING: This product can expose [...]