Marine Safety > Accessories
DC Voltage Reducer For use when installing 12V DC devices where onboard power suppliers are 24 to 32 VDC. May be used for any device requiring 12V DC with .50 Amps or less input. *Sold as an Individual
Marine Safety > Fume Detectors
SV-1 1/4″ Solenoid Valve The SV-1 solenoid valve is the original equipment included with: C-1 Gas Controller S-1A Propane Detector S-2A Propane Detector Use this 1/4″ solenoid valve as a replacement if needed. It opens the flow of propane when powered and automatically closes with low or not current for added safety. 1/4″ female NPT [...]
Marine Safety > Accessories
Gasoline & Propane Sensor Only This sensor is a replacement for Fireboy-Xintex P systems. Installation: The sensor should be located by the propane-powered appliance, near the floor Avoid areas where damage may take place due to cleaning, mopping, kicking, or other physical damage Harsh chemicals should not be used to clean sensors Use the appropriate [...]
Marine Safety > Fume Detectors
CO Alarm 12/24V DC with Interconnect – Black A Carbon Monoxide (CO) detector should be installed in each accommodation space. Small crafts or RV’s with an open design may require only one (1) detector for adequate protection. If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be [...]
Marine Safety > Fume Detectors
Fireboy-Xintex CO Alarm Internal Battery w/Interconnect – Black
CO Alarm Internal Battery w/Interconnect – Black A Carbon Monoxide (CO) detector should be installed in each accommodation space. Small crafts or RV’s with an open design may require only one (1) detector for adequate protection. If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be installed in [...]
Marine Safety > Fire Suppression
Automatic Vertical Fire Extinguisher with Heavy Duty Bracket – 175 Cubic Feet Volume Protected This fire extinguisher provides clean agent fire suppression and is meant to be mounted vertically with the heavy-duty bracket. Features: Discharge is automatic at 175 degrees F (79 degrees C) for round-the-clock engine compartment fire protection Total flooding of the engine compartment [...]
Marine Safety > Fume Detectors
CO Alarm 12/24V DC with Interconnect – Black A Carbon Monoxide (CO) detector should be installed in each accommodation space. Small crafts or RV’s with an open design may require only one (1) detector for adequate protection. If two (2) or more sleeping areas or spaces are partitioned, then one (1) detector should be [...]
Automotive/RV > Fume Detectors,Marine Safety > Fume Detectors
Auxiliary Relay 30 Amp, single pole double throw relay for extra heavy loads. For use with the following fume detectors:MB-1-RS-2A
Automotive/RV > Fume Detectors,Marine Safety > Fume Detectors
Remote Loud Horn The RH-1 loud horn is for the hearing impaired or installation with extreme ambient noise levels. This horn produces 85 decibel output. Designed to be used with the following fume detectors:M-2A-RMB-2-R
Automotive/RV > Fume Detectors,Marine Safety > Fume Detectors
FG-250RV Smoke Detector – 9V Battery Powered BRK Model FG-250RV is a single-station smoke alarm specifically designed for RV, residential and institutional applications including sleeping rooms in hospitals, hotels, motels, dormitories, and other multifamily dwellings. Features: Dual Ionization sensing chamber – Generally more effective at detecting small particles produced by flaming fires, such as paper [...]
Marine Safety > Accessories
System Ready Panel Warning Light The green warning L.E.D. provides constant monitoring of the fire suppression system when the ignition switch is On. Complies with U.S. Coast Guard requirements for system approval. This 2″ round indicator light has an adhesive back aluminum plate for easy panel mounting and requires a 5/16″ hole for wire routing. [...]
Marine Safety > Accessories
Conversion Plate for CO Detectors – Black Optional conversion plate for mounting CMD6-M Carbon Monoxide Alarms in places where larger CMD2-M, CMD3-M, CMD4-M or CMD5-M units were previously installed. This cover plate covers up unsightly wear or openings from previous installations. Mounting hardware included. *Sold as an Individual