Marine Plumbing & Ventilation > Bilge Pumps
Beckson Thirsty-Mate Lifeboat & Commercial Vessel Pump – USCG Approved – 3′ Inlet, 10′ Outlet
Thirsty-Mate High Capacity Super PumpCoast Guard Approved for commercial use Manufactured to exceed the original requirements of Coast Guard regulation No. 519C. The specifications of this regulation were later reduced when no hand pump other than Beckson’s could pass the test requirements. Still “over built” to Beckson’s higher standard. Length: 24″ Diameter: 3″ GPM: 22 [...]
Marine Plumbing & Ventilation > Bilge Pumps
Beckson Thirsy-Mate High Capacity Super Pump w/4′ Intake, 6′ Outlet
Thirsty-Mate High Capacity Super Pump The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean [...]
Marine Hardware > Hatches
Drain Port – 4″ x 14″ x 2″-Depth – White/Clear Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray. The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are easy to clean. No water enters the [...]
Marine Hardware > Hatches
Drain Port – 4″ x 14″ x 1″-Depth – White/Clear For ports mounted on a sloped surface. Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray. The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are [...]
Marine Hardware > Hatches
5″ x 12″ x 1″ Self Drain™ Opening Port The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows [...]
Marine Hardware > Hatches
5″ x 12″ x 2″ Self Drain™ Opening Port The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows [...]
Marine Hardware > Hatches
Beckson 18×21 Rectangular Hatch – White – ASA Material Acrylonitrile Styrene Acrylate
18×21 Rectangular Hatch – White – ASA Material Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface Specifications: Dimensions OD: 18-1/8″ x 20/1/2″ Dimensions ID: 14-5/8″ x 17″ Hole [...]
Marine Plumbing & Ventilation > Bilge Pumps
Diaphragm Pump Made of corrosion-proof marine plastic. Two position stainless steel handle and adjustable (Octagonal) frame permits up to 16 variations in stroke direction. Mounts vertically on bulkhead or horizontally on deck without the need for special brackets. Uses Beckson FH-1-1/2 or VCS-1-1/2 hose. Dimensions with handle removed: Length: 9″ (23 cm) Width: 6-1/4″ (16 [...]
Marine Hardware > Hatches
Beckson 14″ x 24″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate
14″ x 24″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One-Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface
Marine Hardware > Hatches
Beckson 11″ x 15″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate
11″ x 15″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One-Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface
Marine Plumbing & Ventilation > Bilge Pumps
Flex-a-Pump Impossible Place Pumps A Thirsty-Mate with extra reach! This pump can be permanently installed and will operate in any position. It comes complete with mounting brackets, intake hose and clamp, strainer, check valve and discharge hose. Ideal for small boats, engine compartments and much more. Features: Diameter: 1-3/4″ (44 mm) Length: 14″ (35.6 cm) [...]
Marine Plumbing & Ventilation > Bilge Pumps
Thirsty-Mate Hand Pump The Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the [...]