Engine Management Unit Analog – NMEA2000Share engine information on the NMEA 2000® bus… The Actisense EMU-1 is a specialised analogue to NMEA 2000 Gateway which converts data from analogue engine senders into NMEA 2000. The EMU-1 enables NMEA 2000 display devices to monitor the engine on a vessel. The EMU-1 has a PC based configuration [...]

0183 to N2K Gateway with PC Interface, USB The NGX-1 is an intelligent gateway that converts NMEA 0183 data to NMEA 2000 (and vice versa), allowing you to share information between devices from the two standards. This creates the possibility of upgrading some of the vessel’s electronics to NMEA 2000 and keeping the remaining NMEA [...]

0183 to N2K Gateway with PC Interface, ISO  The NGX-1 is an intelligent gateway that converts NMEA 0183 data to NMEA 2000 (and vice versa), allowing you to share information between devices from the two standards. This creates the possibility of upgrading some of the vessel’s electronics to NMEA 2000 and keeping the remaining NMEA [...]

NMEA 2000® Rib Starter Kit An expandable solution for smaller boat users that wish to install an NMEA 2000 network. Installing small NMEA 2000 networks is quicker and easier than it’s ever been with this NMEA 2000 Starter Kit (A2K-KIT-3) from Actisense. The equivalent of four T-pieces in a single case provides a significant time [...]

Micro 4-Way Instrument Drop The Actisense 4-way drop makes it easier to reach up to four devices with a single cable. Typically, when four devices need to be connected to an NMEA 2000 backbone, a T-piece and individual cable is required for each one. This can either mean excessive cabling demands or moving the backbone [...]

Small Boat N2K Network Kit Installing compact sized NMEA2000® networks is now quicker and easier with the introduction of the Small Boat Network from Actisense. This “backbone in a box” is the equivalent of four T-pieces, two terminators and a power tap, all molded into a single, compact case. This innovative design provides a significant [...]

N2K Micro 4 Way T-Piece The Actisense 4 Way T-Piece is for use where multiple drops or ‘ports’ are required from the NMEA 2000 backbone. It’s as quick and easy to install as a single T-Piece, uses less space than two individual T-pieces, and costs less than four. The Actisense range of NMEA 2000 connectors [...]

N2K Female/Female Gender Changer – 0.25M Use between two cable connectors of the same type and gender. Overcomes the problem of connecting two devices or cables which have the same gender of connector on an NMEA 2000® backbone. Female to Female – 0.25M