XD Crank Top Mount
Features:
- For use on sport fishing boats up to 50 feet
- Adjustable Upper Arm with ‘Run’ & ‘Laydown’ position Stops
- User-friendly Folding Crank Handle with Integrated Drive Brake
- Upper-Arm adjusting Ball-bearing drive system, with Integrated Balance Spring-assist
- Extreme Duty Top Plate, Upper Arm, and Housings for Outriggers up to 22ft in length
- Stainless-Steel & Bronze bushed Head pivot for Maximum trolling strength & durability
- Unique invertible Tigress handle design for use on both soft and hard tops over 2” thick
- Accepts all Tigress XD 1-1/2” butt diameter outriggers and XD 1-1/8” butts using an adapter
- Fits Tigress and other industry-standard 4” x 6” mounting plates (four 5/16” diameter fasteners)
- Extreme-duty 316L Stainless Steel and anodized aluminum and sealed construction with UV protection
- 24 adjustable/locking system positions featuring Tigress XD 316L Stainless Steel design
- Ergonomic 316 Stainless Steel mirror-polished lever design with inverting ability for extra hand clearance on the thickest tops
- User-friendly underside lever actuation, with 8 optional indexable set-up positions
- Fits through all standard 3” diameter mounting plates and hardtop holes
- Sold as pair
- 3-Year Limited Warranty
Brand
Tigress
Accessories
No literature available for this product.
No videos available for this product.
Related products
Hunting & Fishing > Outrigger Accessories
Center Rigger Single RigRK0322RK/CR 1 – Hanks Black Braided Line1 – Black’s Release Clips 1 –5⁄16” x 12″ Tension Cords 1 – Eye Straps with Screws2 – Snap Swivels1 – Ball Stops
Hunting & Fishing > Outrigger Accessories
Single Rig MC0323LKUp To 25ft Outriggers 2 – Hanks Black Braided Line2 -1/4in x 12in Tension Cords 2 – Eye Straps with Screws4 – Snap Swivels2 – Ball Stops Release Clips Not Included
Hunting & Fishing > Outrigger Accessories
Lee’s Deluxe Rigging Kit – Single Rig Up To 37ft. – Black Mono
Deluxe Rigging Kit – Single Rig Up To 37ft. – Black Mono Features: Single Rig Up to 37ft. 150 feet of Black Mono 2 – 5/16in x 12in Tension Cords 4 – Eye Straps with Screws 4 – Snap Swivels 2 – Ball Stops Release Clips Not Included
Hunting & Fishing > Outrigger Accessories
Center Rigger Single Rig – No Release Clip 1 – Hanks Black Braided Line1 – 5/16in x 12in Tension Cords 1 – Eye Straps with Screws2 – Snap Swivels1 – Ball Stops *Release Clip NOT Included
Hunting & Fishing > Outrigger Accessories
AL7303CR Fits 1.660″ Pipe The AL7300 (1-3/8″ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
Hunting & Fishing > Outrigger Accessories
Now an easy way to manage outrigger lines while on board. With TACO’s new clamp-on Outrigger Line Caddy, anglers have an easy way to store line while outriggers are rigged and in the retracted position. By simply clamping the pair of outrigger line caddy ears onto the outrigger pole at the desired distance, the excess [...]
Hunting & Fishing > Outrigger Accessories
Lee’s Sidewinder Bolt-In Outrigger Mounts, Lay-Down Version – Silver(Pair)
Sidewinder Bolt-On Outrigger Mount Below top operation. Fully locked in Running and 80 degree out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just [...]
Hunting & Fishing > Outrigger Accessories
MX7000CR Adjustable Angle holders MX7000CR (1-1/2″ ID) are our strongest and most versatile holders. The three point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main [...]