Smart BMS 12/200 for Victron LIFEPO4 Batteries 12VDC Only
The Smart BMS 12/200 is an all-in-one Battery Management system for Victron Lithium-Iron-Phosphate (LiFePO4) Smart Batteries. It has been specifically designed for 12V systems with a 12V alternator such as in vehicles and boats.
It combines a Current Limiter, Battery Combiner, and Battery Protector in a robust and compact solution and lets you safely connect any size 12V alternator (and starter battery), loads, and chargers to Smart Lithium batteries.
The Smart BMS 12/200 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources, or DC loads in case of low battery cell voltage, high battery cell voltage, or over temperature.
The dedicated alternator connection provides current limiting and one-way traffic from the alternator into the battery, so any size alternator (and starter battery) can be safely connected to the Smart Lithium battery (or battery bank) and the starter battery is protected from excessive discharge.
The BMS is equipped with Bluetooth for monitoring and configuration, a remote on/off the connector, to turn the BMS (and the system) off via a remote switch, and a pre-alarm contact, to give a warning signal before the BMS will disconnect the batteries from the system.
Please contact your dealer for any returns, repairs or support issues related to this product.
| Weight | 5.95 g |
|---|---|
| Dimensions | 15 × 6 × 3 cm |
Brand
Victron Energy
Accessories
- Victron Holder MEGA Fuse
- Victron Cable f/Smart BMS CL 12-100 to MultiPlus
- Victron M8 Circular Connector 3-Pole BMS BTV Extension Cables - Pair - 1M
- Victron M8 Circular Connector 3-Pole BMS BTV Extension Cables - Pair - 2M
- Victron M8 Circular Connector 3-Pole BMS BTV Extension Cables - Pair - 3M
- Victron M8 Circular Connector 3-Pole BMS BTV Extension Cables - Pair - 5M
Literature
Quick Guide: Download PDF
No videos available for this product.
Related products
Electrical > Battery Management
9001e e-Series Battery Switch Selector Features: Make-before-break contact design allows switching between battery banks without power interruption CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8″-16 tin-plated copper studs for maximum conductivity [...]
Electrical > Battery Management
Blue Sea 7902 Icon Circuit Identification Label Kit for Battery Switches
7902Icon Circuit Identification Label Kit for Battery Switches 18 icon labels for battery switches, use to identify circuits Examples: Battery, Bow Thruster, Chassis Engine, House WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more [...]
Electrical > Battery Management
Diesel Power Battery Heavy-Duty Switch Features: For 6, 12, 24 or 36 Volt systems Polycarbonate case One year warranty Specifications: Continuous Amps: 450 Momentary Amps: 800 Cable Lug Size: 1/2″ Color: Gray Dimensions: 5-1/2″ sq x 3-1/2″H WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of [...]
Electrical > Battery Management
Battery Selector Switch Part No. 2111A Features New ergonomically styled turn knob provides easy On/Off switching Updated color scheme and graphics make it easier to determine switch status Longer stud lengths for improved assembly and easier cable routing Built with heavy-duty copper sweep contacts to ensure positive circuit control Rugged internal components protected by a [...]
Electrical > Battery Management
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect
3003 HD-Series Battery Switch Selector with Alternator Field Disconnect Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept 4 or more cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht [...]
Electrical > Battery Management
Blue Sea 9002e e-Series Battery Switch Selector w/Alternator Field Disconnect
9002e e-Series Battery Switch Selector with Alternator Field Disconnect Features: Switches isolated battery banks to all loads or combines battery banks to all loads Includes AFD (Alternator Field Disconnect) Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installation aboard gasoline powered boats Case design allows surface or rear panel [...]
Electrical > Battery Management
Single Circuit On/Off CE Marked Enables a failed House or Start battery bank to be isolated from the electrical system and both House and Start loads to be operated from the remaining battery bank Simplifies battery switch operation Isolates Start circuit from House circuit Protects electronics from sags and spikes caused by engine cranking Ignition [...]
Electrical > Battery Management
Battery Selector Switch with AFD Part No. 2110A Description Continuous Amps: 230Momentary Amps: 345Dimensions: 5″D x 2-3/4″H Product FeaturesAlternator field disconnect (AFD) allows selection of any positions, including “off” without damage to alternator or electrical system. AFD is required on some electrical systems. Heavy duty copper sweep contacts “Make before break” contacts allow selection of [...]