12″ AutoFlex Knott Disc Brake Kit
Load Rite’s 6-lug, 12-inch vented rotor disc brake kit is manufactured by AutoFlex KNOTT and fits UFP 6,000 lbs. capacity 6-bolt axles. Does not fit Tie Down.
Kit Includes:
- Vented cupped and studded, zinc rotor, and hub assembly
- Loaded caliper assembly with pads
- Full inner and outer bearings, races, and corresponding seal
- Dust cap, lug nuts, and mounting hardware
*LH/RH Compatible
*Quantity (2) Kits Required Per Axle Assembly
| Weight | 39.5 g |
|---|---|
| Dimensions | 12 × 12 × 12 cm |
Brand
Load Rite
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Trailering > Bearings/Hubs/Brakes
9.6″ Dexter Vented Rotor Disc Brake Kit Load Rite’s 5-lug, 9.6-inch vented rotor disc brake kit is manufactured by Dexter and fits a standard 3,750 lbs capacity spindle. Kit Includes: Vented rotor with Galvx finish Aluminum caliper with e-coat finish Ceramic pads with backing plates Galvanized heavy-duty mounting bracket Dust cap, slider pins, and hardware [...]
Trailering > Bearings/Hubs/Brakes
Hub Kits come complete and ready to install on your axle. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 7,500lb Disc Brake Actuator – Tie Down Engineering Model
7,500lb Disc Brake Actuator – Tie Down Engineering Model The Model 750E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 20,000lb Capacity Disc Brake Actuator w/2-5/16″ Coupler
20,000lb Capacity Disc Brake Actuator with 2-5/16″ Coupler The Model works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the master [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 16,500lb Capacity Disc Brake Actuator w/2-5/16″ Coupler
16,500lb Capacity Disc Brake Actuator with 2-5/16″ Coupler The Model 16.5 works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Brake Pads 10 & 12" Disc Full Axle 2 Sets Inner & Outer Features: Optimal at Transferring Heat Generated From Braking Use with EITHER 10″ or 12″ Disc Brake Rotor Assemblies Sold as FULL SET, BOTH Inner and Outer Assemblies, for ONE (1) Complete Axle Weight: 2.2 lbs
Trailering > Bearings/Hubs/Brakes
10″ Knott Disc Brake Kit Load Rite’s 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles. Kit Includes: Vented cupped and studded, zinc rotor, and hub assembly Loaded caliper assembly with pads Full inner and outer bearings, races, and corresponding seal Dust cap, [...]
Trailering > Bearings/Hubs/Brakes
HubMate Wheel Bearing Protectors HubMate™ bearing protectors replace the dust caps in the wheel hub. The accessible grease fitting allows you to add grease without disassembling it. Positive grease pressure keeps water and dirt out. Features: Outer hub inner diameter: 1.78 inches Automatically lubricates, reducing wear and prolonging bearing life Covers are custom-fitted PVC