RTA-61 Cable-Steer Quick Release Bracket
For quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet and secure locking system. Fits foot control motors with up to a 45″ shaft and hand control motors with up to a 52″ shaft. They are designed to handle the increased torque of QUEST series motors.
Features:
- Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors
- Allows trolling motors to be quickly removed from and reattached to the boat deck
- Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware
- Solid, anodized aluminum construction
- Includes both 5/16″ and 1/4″ stainless steel mounting hardware
- Brackets can be secured with a padlock (not included) for additional security
- Fits 45″ shafts and smaller foot-control motors and 52″ shafts and smaller hand-control motors
| Weight | 11.1 g |
|---|---|
| Dimensions | 27 × 8 × 2 cm |
Brand
Minn Kota
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Boat Outfitting > Trolling Motor Accessories
MKR-19 60A Waterproof Circuit Breaker Protects trolling motor from electrical damage. Features: 60 amp rating with manual reset Fully waterproof Compatible with all 12, 24, and 36-volt systems WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive [...]
Boat Outfitting > Trolling Motor Accessories
Digital Battery Meter (MK-BM-1D) Monitors voltage level and "state of charge" of any 12-volt battery LCD display Compact frame for easy storage LED’s indicate, 2/3, 1/3 or O "state of charge." WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects [...]
Boat Outfitting > Trolling Motor Accessories
Weedless Wedge™ 2 Props (MKP-32) Minn Kota®s exclusive prop is the only of its kind that is 100 percent weedless. Unique design features swept-back and flared blades to "wedge" weeds away while conserving battery power. Moves through heavy vegetation, even at slow speeds. Motor Diameter: 3 – 5 / 8"Prop Nut Kit: "A" Compatible with [...]
Boat Outfitting > Trolling Motor Accessories
Weedless Wedge™ Props (MKP-6) The only 100% fully weedless prop. Design pushes weeds away to conserve battery power. Easily moves through heavy vegetation or cover, even at slow speeds. Motor Diameter: 3 – 1 / 4"Prop Nut Kit: "A" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the [...]
Boat Outfitting > Trolling Motor Accessories
Minn Kota RTA-19 Riptide® Saltwater Composite Quick Release Bracket
Riptide® Saltwater Composite Quick Release BracketRTA-19 Allows for easy removal of any Riptide® SM or Riptide SE bow-mount trolling motor High-yield composite construction is super strong and impervious to corrosion Low-profile design leaves deck clear when motor is removed Locking handle with stainless steel pins can be secured with padlock (not included). WARNING: This product [...]
Boat Outfitting > Trolling Motor Accessories
This heavy-duty trolling motor connector uses a snap-lock design for 6- to 12-gauge wire. The kit includes two plug halves, four contacts and four solder plugs for securing wire leads into contacts (wire not included). WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to [...]
Boat Outfitting > Trolling Motor Accessories
MKR-US2-10 Lowrance Adapter CableModel:#1852060 Universal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. These adapters connect your trolling motor to your favorite brand of sonar or fishfinder (200 kHz and 200/83 kHz DualBeam PLUS™ compatible). Shielded, IP68-rated waterproof connectors are metal tipped to prevent [...]
Boat Outfitting > Trolling Motor Accessories
MKA-21 Composite Quick Release Bracket Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72″ shaft length motors. [...]