Octopus Sailboat Drive Short Stroke 8″ Up To 38' or 15,400lbs
$1,894.47
Out of stock
Sailboat Drive Short Stroke 8″ Up To 38′ or 15,400lbs
Rotary Mechanical Sailboat Drive, 8″ long stroke, for vessels up to 38 feet or 15,400 lbs. Optional rudder feedback unit.
Brand
Octopus Autopilot Drives
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Navigation & Instruments > Autopilots
ST2000 Plus Tiller Pilot ST2000 Plus tiller autopilot for tiller steered sailing vessels to 10,000 lbs (4,500 kg) *Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement. Includes:Instruction ManualPlus Tiller Pilot 12V SocketTiller Pin (sold in packages of 5)Mounting Socket (sold in packages [...]
Marine Navigation & Instruments > Autopilots
Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume) The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two-piece gear housed in an [...]
Marine Navigation & Instruments > Autopilots
Type 2 Long Linear Drive – 12V Type 2 (long) Linear drive for mechanically steered vessels up to 44,000lb (20,000kg). Designed for boats with existing mechanical steering systems. The mechanical linear drive provides powerful thrust, fast hardover times and quiet operation. Features: Low backdrive force, to minimize the drives effect on the boats steering when [...]
Marine Navigation & Instruments > Autopilots
ST1000 Plus Tiller Pilot ST1000 Plus tiller autopilot for tiller steered sailing vessels up to 6,600 lbs (3,000 kg) *Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement. Includes: Instruction Manual Plus Tiller Pilot 12V Socket Tiller Pin Mounting Socket
Marine Navigation & Instruments > Autopilots
Type 1 Pump 12voltReversing hydraulic pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering rams. The Type 1 hydraulic drive is compatible with both S1/S1G and S2/S2G corepacks. Use the table below to determine the Type 1 hydraulic drive’s capacity when used with each corepack Corepack Used S1 or [...]
Marine Navigation & Instruments > Autopilots
5M Extension Cable Garmin 5M (16.40 ft) extension cable for your GHP™ 10 is the perfect accessory for mounting the CCU further than 3M (9.84 ft) from the ECU. Compatible Devices:GHP™ 10 Marine Autopilot System WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth [...]
Marine Navigation & Instruments > Autopilots
Furuno Rudder Reference f/Outboards On Navpilot 500 & 511 Autopilots
The FAPAR4502 is a Rudder Reference Unit for the NavPilot 500/OB and NavPilot 511/OB series autopilot. The FAPAR4502 has an 8″ maximum cylinder stroke. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. [...]
Marine Navigation & Instruments > Autopilots
LF3000 LF3000 is a linear feedback unit for boats with outboard engine. It transforms the linearmovement to an analog signal. Supplied with 8,5 m cable and mounting clamps. The LF3000 is a waterproof feedback unit. It has a 300 mm (11,8″) stroke and comes with a special mounting bracket which secures the LF3000 to the [...]