Intermittent Duty Reversing Solenoid – 12V DPDT
A combination of two solenoids in one package to reduce cost and maximize space savings while also providing simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors when neither coil is energized. This intermittent duty solenoid can be used at a variety of amperages.
Specifications:
- 75A Make/Break: 5 min On, 5 min Off
- 125A Make/Break: 30 sec On, 5 min Off
- 150A Make Break: 0.5 sec On, 5 min Off
- Circuitry: DPDT
- Contact Material: Copper
- Housing: Plastic
| Weight | 0.9 g |
|---|---|
| Dimensions | 8 × 4 × 3 cm |
Brand
Cole Hersee
No accessories available for this product.
No videos available for this product.
Related products
Electrical > Accessories
12V DC Plug & Dash Socket Features: Plug has a moisture proof sealing ring around the shaft to keep out spray and make it seat firmly in the outlet Plug features an “ON” indicating LED, moisture proof sealing ring, strain relief, and a built-in 10 Amp fuse Socket features a watertight cap, easy installation and [...]
Electrical > Accessories
SeaLink® Deluxe 12 Volt Plug Moisture proof sealing ring LED power indicator light Interchangeable 10A fuse Internal strain relief and cord seal Compatible with standard 12V receptacles Max. rating is 10A WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects [...]
Electrical > Accessories
1010 Features: Moisture proof sealing ring around the shaft to keep out spray and make it seat firmly in the outlet “ON” indicating LED Strain relief Built-in 10 Amp fuse Designed to withstand the rigors of wet environments and constant vibration Large contact surfaces for good electrical connection Twist lock system-plug locks securely into socket [...]
Electrical > Accessories
1011 Features: Features watertight cap, easy installation, and twist locks securely with plug Designed to withstand the rigors of wet environments and constant vibration Large contact surfaces for good electrical connection Twist lock system-plug locks securely into socket Internal strain relief and cord seal Nickel plated copper alloy used for all current carrying components Front [...]
Electrical > Accessories
BF50 50 AMP Female Connector The 50 AMP 125V/250 V connector has been designed to be used with 3-wires (125 V) or 4-wires (250 V) in a single connector. This retro-fit connector offers superior performance and ease of use. The SmartPlug connector is designed to use your current cordset. You simply cut off the cord [...]
Electrical > Accessories
Weathercap The SmartPlug Weatherproof Cover protects SmartPlug boatside shore power connectors from moisture when not in use. Comes with a lanyard for tethering the Weatherproof Cover to a cordset. Features Weatherproof seal – Seals against multi-fin gasket in connector face Ease of Use – Locks into the face of a SmartPlug Connector Easy to Store – Included lanyard [...]
Electrical > Accessories
SeaLink® Deluxe Dual USB Charger & 12V Receptacle 12VDC inputDual USB has 5V, 2.1 amp total outputLED power indicator light for USBReceptacle has 12VDC output, rated up to 20 ampsWater resistant covers protects against dust and waterInsulated terminals included WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the [...]
Electrical > Accessories
50 AMP Male Inlet Cover – Stainless Steel SmartPlug’s 50 AMP 125/250 V inlets provide 20X’s more electrical contact area eliminating the overheating conditions seen with twist-type connectors. The solid sleeve connection and weatherproof seal makes it a preferred option. The mounting flange holes match existing inlets so it can be easily installed to [...]