In-Line Non-Return Check Valve – 1″
In-line non-return valve. Connections for 25mm (1”) bore hose.
Features:
- Connections: – for 25mm (1”) bore hose
- Dimensions: – 108mm long, 55mm wide, 50mm high (in-line configuration)
- Aids pump priming, prevents backflow from pump into bilge
- Fits into pump suction line
- Robust plastic construction with nitrile rubber valve
- Adjustable port configuration for convenient hose angle
- Actual Weight: 0.11 Kg (Approx. 0.31 Kg packed)
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
| Weight | 0.2 g |
|---|---|
| Dimensions | 11 × 6 × 3 cm |
Brand
Jabsco
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Marine Sanitation
Atlantes Freedom™ The Atlantes was one of the first toilets to incorporate the idea of having all components mounted within the bowl. The idea behind the Atlantes was to offer a metal handle on the side of the bowl to make the marine bathroom less intimidating for those not used to being on a boat. [...]
Marine Plumbing & Ventilation > Marine Sanitation
Atlantes Freedom™ The Atlantes was one of the first toilets to incorporate the idea of having all components mounted within the bowl. The idea behind the Atlantes was to offer a metal handle on the side of the bowl to make the marine bathroom less intimidating for those not used to being on a boat. [...]
Marine Plumbing & Ventilation > Marine Sanitation
Conversion Kit Convert Jabsco manual toilet compact and regular bowl models to full electric operation without the need to alter existing inlet or discharge seacocks. Also converts most toilets with 4 bolt screw pattern on a 3-3/4″ diameter bolt circle such as Graco, Raritan, Wilcox Crittenden, Mansfield and Sealand Push button flushing for ease and [...]
Marine Plumbing & Ventilation > Marine Sanitation
Atlantes Freedom™ The Atlantes was one of the first toilets to incorporate the idea of having all components mounted within the bowl. The idea behind the Atlantes was to offer a metal handle on the side of the bowl to make the marine bathroom less intimidating for those not used to being on a boat. [...]
Marine Plumbing & Ventilation > Marine Sanitation
Hold N’ Treat System Total onboard, environmentally friendly, waste management system utilizing the best available Type I MSD treatment technology, legal for use in all waters. A 15 gallon holding tank combined with a Type I MSD capable of processing up to 140 gallons of waste per week. Locking switch to prevent accidental discharge. Standard [...]
Marine Plumbing & Ventilation > Marine Sanitation
Waste PumpRobust Single Diaphragm Design Features: Flexible installation No filter required Compact and simple design Dry running capability Connections for 38mm (1 1/2″) ports Up to 19 lpm (5 US gpm) flow Relevant Standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection ISO 8849 MARINE Bilge Pump Standard Built to ISO 15083 Specification Meets [...]
Marine Plumbing & Ventilation > Marine Sanitation
Atlantes Freedom™ The Atlantes was one of the first toilets to incorporate the idea of having all components mounted within the bowl. The idea behind the Atlantes was to offer a metal handle on the side of the bowl to make the marine bathroom less intimidating for those not used to being on a boat. [...]
Marine Plumbing & Ventilation > Marine Sanitation
Run-Dry Macerator Waste Pump WASTE EVACUATION The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the [...]