SI-TEX SP-120 System w/Rudder Feedback & Remote Mechanical Drive – 1994 + Mercury IO/Volvo Gas
$3,999.00
Out of stock
SP-120 System with Rudder Feedback & Remote Mechanical Drive – 1994 + Mercury IO/Volvo Gas
The SP-120 autopilot control system comprises the following units:
- SP-120 display and control head
- SI-TEX 9 Axis rate compass
- Rudder Feedback Unit (SP-120R only)
In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.
A rudder actuator system comprises one of the following:
- Hydraulic system with helm pump and ram
- Mechanical steering system
The autopilot should be connected to one of the following:
- Reversing motor/pump set connected into the existing hydraulic steering system
- Reversing mechanical drive unit connected to the existing steering mechanism
- Electronic Hydraulic Solenoid Valves
| Weight | 22.2 g |
|---|---|
| Dimensions | 26 × 16 × 8 cm |
Brand
SI-TEX
No accessories available for this product.
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Marine Navigation & Instruments > Autopilots
Tiller Bracket The 120MM(4.72″) Tiller Bracket is designed for use with Simrad autopilot computer systems.
Marine Navigation & Instruments > Autopilots
SmartController Wireless SeaTalk autopilot and instrument remote control unit. SmartController Wireless Remote Take control of your Raymarine SeaTalk® network with the powerful SmartController wireless handheld remote. Set a new course to steer or monitor vital instrument and navigation data in the palm of your hand. Big on features, the waterproof SmartController is lightweight and compact [...]
Marine Navigation & Instruments > Autopilots
Type 2 Pump 12Volt Reversing hydraulic pump for use with steering systems equipped with 9.821 cubic inch (160-350cc) hydraulic steering rams. Compatible with 400 Series corepacks. Designed for boats with existing hydraulic steering systems.
Marine Navigation & Instruments > Autopilots
Type 1 Pump 12voltReversing hydraulic pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering rams. The Type 1 hydraulic drive is compatible with both S1/S1G and S2/S2G corepacks. Use the table below to determine the Type 1 hydraulic drive’s capacity when used with each corepack Corepack Used S1 or [...]
Marine Navigation & Instruments > Autopilots
5M Extension Cable Garmin 5M (16.40 ft) extension cable for your GHP™ 10 is the perfect accessory for mounting the CCU further than 3M (9.84 ft) from the ECU. Compatible Devices:GHP™ 10 Marine Autopilot System WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth [...]
Marine Navigation & Instruments > Autopilots
Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume) The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two-piece gear housed in an [...]
Marine Navigation & Instruments > Autopilots
PB909mm Pedestal Bracket
Marine Navigation & Instruments > Autopilots
SRA-1Rudder Angle IndicatorDisplays precision analog position reading. A quick, positive, visual indication of rudder angle can be very important when docking or maneuvering a boat in tight quarters. It can save not only your gel coat but your pride. The SI-TEX SRA-1 Rudder Angle Indicator gives you a precise look at exactly where your rudder [...]