Triple Lock Rectangular Marine Hatch – 10″ x 14″ – White
This Triple Latch Marine Deck Hatch features 3 locking points which when engaged cause the camming surface to pull the lid into the gasket creating a water tight seal. Constructed of injection molded polypropylene with a structural honeycomb lid for superior rigidity and strength. Non-slip textured surface. Can be mounted horizontally or vertically. Full length piano hinge for added strength and security. Interior opening is 11-1/8″ X 7″ and will accept group 24 series size batteries. Installs with ten #10 FH fasteners (not included).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 2.45 g |
|---|---|
| Dimensions | 16 × 12 × 3 cm |
Brand
Sea-Dog
Accessories
- BoatLIFE LifeSeal® Sealant Cartridge - Clear
- BoatLIFE LifeSeal® Sealant Cartridge - White
- BoatLIFE LifeSeal® Sealant Cartridge - Black
- BoatLIFE LifeSeal® Sealant Cartridge - Aluminum
- BoatLIFE LifeSeal® Sealant Cartridge - Cameo
- BoatLIFE Silicone Rubber Sealant Cartridge - Clear
- BoatLIFE Silicone Rubber Sealant Cartridge - White
- BoatLIFE Silicone Rubber Sealant Cartridge - Black
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - Clear
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - White
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - Black
No literature available for this product.
No videos available for this product.
Related products
Marine Hardware > Hatches
Flush Hatch Pull Constructed of corrosion resistant investment cast 316 stainless steel. These hatch pulls are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Installs with four #8 FH fasteners (not included). WARNING: This product can [...]
Marine Hardware > Hatches
MAGNUS Escape Hatch – OD 22-3/16″ x 22-3/16″ Heavy Duty Ocean Hatch MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck. These hatches are provided with friction hinges, [...]
Marine Hardware > Hatches
Stainless Steel/Nylon Hatch Spring This strong Hatch Spring has an internal cable that prevents the spring from being overextended during normal use. Ideal for larger hatches and dock boxes. Constructed of corrosion resistant formed 304 stainless steel with heavy duty molded nylon mounting pads on both ends. Installs with eight #10 RH fasteners (not included). [...]
Marine Hardware > Hatches
5″ x 12″ x 2″ Self Drain™ Opening Port The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows [...]
Marine Hardware > Hatches
Size 54 Medium Profile Hatch Ideal as a foredeck hatch on larger offshore yachts, the Medium Profile has thicker acrylic and deeper frame sections for greater strength and durability. It features Lewmar’s unique sealing system, allowing for easy acrylic replacement. All while retaining the smooth, modern lines of the low-profile hatch. Features: Outside handles allow [...]
Marine Hardware > Hatches
ALTUS Ventilation Hatch – OD 13-1/8″ x 13-1/8″ ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come [...]
Marine Hardware > Hatches
Drain Port – 4″ x 14″ x 2″-Depth – White/Clear Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray. The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are easy to clean. No water enters the [...]
Marine Hardware > Hatches
Beckson 18×21 Rectangular Hatch – White – ASA Material Acrylonitrile Styrene Acrylate
18×21 Rectangular Hatch – White – ASA Material Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface Specifications: Dimensions OD: 18-1/8″ x 20/1/2″ Dimensions ID: 14-5/8″ x 17″ Hole [...]