Stainless Steel/Nylon Hatch Spring
This strong Hatch Spring has an internal cable that prevents the spring from being overextended during normal use. Ideal for larger hatches and dock boxes. Constructed of corrosion resistant formed 304 stainless steel with heavy duty molded nylon mounting pads on both ends. Installs with eight #10 RH fasteners (not included).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 0.85 g |
|---|---|
| Dimensions | 17 × 4 × 2 cm |
Brand
Sea-Dog
No accessories available for this product.
Literature
Installation Guide: Download PDF
No videos available for this product.
Related products
Marine Hardware > Hatches
Drain Port – 4″ x 14″ x 1″-Depth – White/Clear For ports mounted on a sloped surface. Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray. The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are [...]
Marine Hardware > Hatches
Beckson 14″ x 24″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate
14″ x 24″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One-Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface
Marine Hardware > Hatches
Beckson 11″ x 15″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate
11″ x 15″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One-Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface
Marine Hardware > Hatches
ALTUS Escape Hatch – OD 23-1/16″ x 23-1/16″ ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come [...]
Marine Hardware > Hatches
Sea-Dog Triple Lock Rectangular Marine Hatch – 10″ x 14″ – White
Triple Lock Rectangular Marine Hatch – 10″ x 14″ – White This Triple Latch Marine Deck Hatch features 3 locking points which when engaged cause the camming surface to pull the lid into the gasket creating a water tight seal. Constructed of injection molded polypropylene with a structural honeycomb lid for superior rigidity and strength. [...]
Marine Hardware > Hatches
Hatch Cover Pull & Gasket Highly corrosion resistant, this Hatch Cover Pull provides a simple and convenient way to open the hatches in your boat. Easy-to-install, it features a stainless steel washer for a tight and secure fit, and a rubber gasket to reduce noise and resist water penetration. Commonly used on deck mounted access [...]
Marine Hardware > Hatches
5″ x 12″ x 1″ Self Drain™ Opening Port The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows [...]
Marine Hardware > Hatches
Ocean Flat Base – Size 60 Hatch With its classic style, the Ocean Hatch is fitted to thousands of boats around the world. Its rugged construction provides the ultimate protection against the elements, whatever conditions you might face. Features: Friction levers hold the lid open in any position up to 95° Anodized aluminum frame for [...]