Stainless Steel Flip Top Deck Fill Lever Rebuild Kit
Kit Contains:
- 1 Lever
- 1 Lever Spring
- 2 Pivot Pins
- 1 Cotter Pin
- 1 Cap Spring
- 1 Gasket/Washer
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 0.25 g |
|---|---|
| Dimensions | 3 × 3 × 3 cm |
Brand
Sea-Dog
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Hardware > Deck Fills
Pipe Deck Fill 1-1/2″ Gas Features: 316 S.S. 1-1/2″ Pipe Gas Deck Fill with Key Chain included Flange: 3-3/8″ Fastener: #10 (3) Weight: 20oz Replacement cap & chain is P/N 6074
Marine Hardware > Deck Fills
Description: Key for all 316 S.S. Deck Fills. Material: 316 Stainless Steel
Marine Hardware > Deck Fills
Description: 316 S.S. Hose Deck Fill with Key for Waste Flange – 3″ Hose – 1-1/2″ Angle – 90 degrees Chain – no Fastener – #10 (3) Weight – 12.8 oz.Material: 316 Stainless Steel Type: Waste
Marine Hardware > Deck Fills
Description: 316 S.S. 1-1/2″ Push-Up Hose Deck Fill – Waste (Black) Angle – 90 degrees Chain – No Fastener – #10 (3)Flange: 3″Hose Size: 1-1/2″
Marine Hardware > Accessories
White Flip Top Cap Fills for 1-1/2″ Hose – White Features: White Polymer Integral Tank Vent with Flame Arrestor No Ground Wire Required EPA Compliant Flip Top Cap with Vacuum Pressure Relief Valve These fills meet the CARB and EPA requirements of U.S.C.G. Safety Standards (July 31, 2011) for 40 CFR Parts 9, 60, 80 [...]
Marine Hardware > Deck Fills
Description: 316 S.S. 1/2″ Push-Up Hose Deck Fill – Gas (Red). Angle – 90 degreesChain – Yes Fastener – #10 (3)Flange: 3″Hose Size: 1-1/2″
Marine Hardware > Deck Fills
Replacement Cap and Chain – 6001 Gas Fill Gas Fill, 1-1/2″ Hose w/Splash Shield
Marine Hardware > Deck Fills
Replacement Cap & Chain for 6031, 6032, 6033, 6034, 6394, 6395, 6124B, 6126S. Made of 316 S.S.