Verado Adapter Kit
Fittings kit for plumbing your Garmin hydraulic autopilot for most Verado steering systems.
What’s In The Box?
- 4 ¼” NPT to ORFS adapters
- 2 ¼” NPT Male to female adapters
- 4 NPT male to ORFS female adapters
- 2 ORFS tees
- 2 high pressure rated ORFS shut off ball valve
- 1 barb shut off valve
- 1 barb to NPT adapter
- 1 barb tee
- 4 hose clamps
- Install instructions
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 2.4 g |
|---|---|
| Dimensions | 7 × 5 × 3 cm |
Brand
Garmin
No accessories available for this product.
Literature
Installation Guide: Download PDF
No videos available for this product.
Related products
Marine Navigation & Instruments > Autopilots
Tiller Bracket The 120MM(4.72″) Tiller Bracket is designed for use with Simrad autopilot computer systems.
Marine Navigation & Instruments > Autopilots
ST2000 Plus Tiller Pilot ST2000 Plus tiller autopilot for tiller steered sailing vessels to 10,000 lbs (4,500 kg) *Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement. Includes:Instruction ManualPlus Tiller Pilot 12V SocketTiller Pin (sold in packages of 5)Mounting Socket (sold in packages [...]
Marine Navigation & Instruments > Autopilots
Rudder Feedback Simrad rudder feedback units are high resolution units which contribute to gentle yet accurate steering that characterize the Simrad autopilots. They are rugged units designed to withstand the environment. Though Simrad now offers the virtual rudder feedback VRF™ for outboards and stern drive boats up to 40′, it is neccessary to display rudder [...]
Marine Navigation & Instruments > Autopilots
Type 1 Pump 12voltReversing hydraulic pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering rams. The Type 1 hydraulic drive is compatible with both S1/S1G and S2/S2G corepacks. Use the table below to determine the Type 1 hydraulic drive’s capacity when used with each corepack Corepack Used S1 or [...]
Marine Navigation & Instruments > Autopilots
Autopilot Pump, 12 VDC, 1.0 Cubic Inches Per Second (For Ram Sizes of Up to 12 Cubic Inches in Volume) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not [...]
Marine Navigation & Instruments > Autopilots
LF3000 LF3000 is a linear feedback unit for boats with outboard engine. It transforms the linearmovement to an analog signal. Supplied with 8,5 m cable and mounting clamps. The LF3000 is a waterproof feedback unit. It has a 300 mm (11,8″) stroke and comes with a special mounting bracket which secures the LF3000 to the [...]
Marine Navigation & Instruments > Autopilots
TP32 Tillerpilot The TP32 is a reliable and robust autopilot, which has been optimized to draw as little power as possible and operate extremely quietly, making it ideal for sailboats up to 37 ft. Features:Easy to usePrecision steeringBattery OptimizationSilent SailingWaterproof SealingSimNet Compatible Easy To UseA simple selection of controls enable straightforward selection of the adjustments [...]
Marine Navigation & Instruments > Autopilots
Pumpset Features:18CU12V