Ballast King Bronze DC Pump with Reversing Switch – 15 GPM
Wakeboard and Ski Boat Ballast Pump
Features:
- Flow rate: 15 US gallons/min (57 Litres/min)
- Self-priming from dry up to 1.2m (4ft)
- Adds approx 125lbs (56kgs) of ballast per minute
- Reversible to both fill and empty tanks
- Simple design means fewer wearing parts.
- ISO 8846 MARINE (Ignition protection).
Applications:
The Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.
Specifications:
- Body Materials: Bronze
- Impeller: Jabsco Neoprene compound
- Seal: Lip Type
- Port(s): 1/2″ Internal Pipe Threads 1″ External Hose Barb
- Voltage: 12 (Vdc)
- Amp Draw: 19 (amp)
- Fuse Size: 25 (amp)
- Motor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible
- Duty Cycle: 30 Minutes Max
- Dimensions: 3 5/8 x 8 x 4 3/4 (inches)
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
| Weight | 8.6 g |
|---|---|
| Dimensions | 12 × 6 × 6 cm |
Brand
Jabsco
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Ballast Pumps
Mastercraft Ballast Pump – 12V The Jabsco Wake/Surf boat Ballast pump is the direct replacement for Mastercraft part number 300249. The Jabsco pump comes standard with a green Run Dry Impeller and has the standard electrical quick connector already installed. Just connect your hoses, mount the pump in the boat, plug the power leads together [...]
Marine Plumbing & Ventilation > Ballast Pumps
Jabsco Ballast King Bronze DC Pump with Deutsch Connector – No Reversing Switch – 15 GPM
Ballast King Bronze DC Pump with Deutsch Connector – No Reversing Switch – 15 GPM Wakeboard and Ski Boat Ballast Pump Features: Flow rate: 15 US gallons/min (57 Litres/min) Self-priming from dry up to 1.2m (4ft) Adds approx 125lbs (56kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer [...]
Marine Plumbing & Ventilation > Ballast Pumps
Ballast Pump FIP F4 12V DC 12V F4-size ballast pump with a capacity of 55 L/min (14.25 GMP). This pump is used for ballast pumping of water between tanks. Features: Pump body in brass, stainless steel shaft, premium ballast MC19 compound impeller, and seawater-resistant shaft seal Self-priming up to a 3m vertical lift Reversible flow [...]
Ballast SuperKing Pump with Deutsch Connector – 20 GPM When you’re having fun on a wakeboard, skis, or a tube, a bigger wake will create a more exhilarating ride. Xylem’s Jabsco ballast pumping systems, including the Ballast Puppy, Ballast King, and Ballast SuperKing, make taking on weight easy with tanks that rapidly fill at the [...]
Marine Plumbing & Ventilation > Ballast Pumps
Ballast Pump Today’s Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested Puppy Pumps lets these specialist craft rapidly take on and dump ballast, while modern electronics guard against dry running damage to the impeller The choice of [...]
Marine Plumbing & Ventilation > Ballast Pumps
Ballast King Bronze DC Pump without Switch – 15 GPM Wakeboard and Ski Boat Ballast Pump Features: Flow rate: 15 US gallons/min (57 Litres/min) Self-priming from dry up to 1.2m (4ft) Adds approx 125lbs (56kgs) of ballast per minute Reversible to both fill and empty tanks Simple design means fewer wearing parts. ISO 8846 MARINE [...]
Marine Plumbing & Ventilation > Ballast Pumps
Talulah High Flow Ballast Pump – 30 GPM – 12V With an extraordinary 30GPM rating, the Johnson Pump Talulah HighFlow Ballast Pump represents the industry gold standard of high speed, reliable and efficient reversible ballast pumps. Built with ball bearings, a solid bronze pump head, and built-in thermal protection, this ballast pump is exceptionally durable [...]
Marine Plumbing & Ventilation > Ballast Pumps
Talulah Ballast Pump – 13.5 GPM – 12V Features: Built in Thermal Overheat Protection: Automatic reset after cooling down Monitor Filling: Tanks must have overfill protection Retrofit Possible: Important to have full bore hoses – without restriction Dry Run Impeller* Intermittent Duty Important to have good electric installation and proper wire size (Acc. to ISO [...]