5″ x 12″ x 1″ Self Drain™ Opening Port
The Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows where an angled spigot extends below the bolt holes. The internal angle seats tightly against the gasket and lens, thus omitting an exterior water retention ledge present in most other ports. (No water-fall when you open the port after a rain.) Self Drain™ Opening Ports are ideal for mounting where installation is within 15x of vertical (with spigot length up to one inch). Longer spigots are available for vertical installations. For greater angles use Beckson Rain Drain™ Ports.
| Weight | 2.6 g |
|---|---|
| Dimensions | 15 × 9 × 4 cm |
Brand
Beckson Marine
Accessories
- BoatLIFE LifeSeal® Sealant Cartridge - Clear
- BoatLIFE LifeSeal® Sealant Cartridge - White
- BoatLIFE LifeSeal® Sealant Cartridge - Black
- BoatLIFE LifeSeal® Sealant Cartridge - Aluminum
- BoatLIFE LifeSeal® Sealant Cartridge - Cameo
- BoatLIFE Silicone Rubber Sealant Cartridge - Clear
- BoatLIFE Silicone Rubber Sealant Cartridge - White
- BoatLIFE Silicone Rubber Sealant Cartridge - Black
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - Clear
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - White
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - Black
No literature available for this product.
No videos available for this product.
Related products
Marine Hardware > Hatches
Drain Port – 4″ x 14″ x 1″-Depth – White/Clear For ports mounted on a sloped surface. Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray. The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are [...]
Marine Hardware > Hatches
ALTUS Ventilation Hatch – OD 13-1/8″ x 13-1/8″ ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come [...]
Marine Hardware > Hatches
Beckson 14″ x 24″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate
14″ x 24″ Flush Hatch White – ASA Material – Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One-Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface
Marine Hardware > Hatches
Drain Port – 4″ x 14″ x 2″-Depth – White/Clear Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray. The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are easy to clean. No water enters the [...]
Marine Hardware > Hatches
ALTUS Escape Hatch – OD 23-1/16″ x 23-1/16″ ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come [...]
Marine Hardware > Hatches
MAGNUS Escape Hatch – OD 22-3/16″ x 22-3/16″ Heavy Duty Ocean Hatch MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck. These hatches are provided with friction hinges, [...]
Marine Hardware > Hatches
Beckson 18×21 Rectangular Hatch – White – ASA Material Acrylonitrile Styrene Acrylate
18×21 Rectangular Hatch – White – ASA Material Acrylonitrile Styrene Acrylate Features: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface Specifications: Dimensions OD: 18-1/8″ x 20/1/2″ Dimensions ID: 14-5/8″ x 17″ Hole [...]
Marine Hardware > Hatches
MAGNUS Escape Hatch – OD 26-3/4″ x 26-3/4″ Heavy Duty Ocean Hatch MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck. These hatches are provided with friction hinges, [...]